Bosch Appliances D6600 installation and operation guide Conettix Datagram Type Differences

Page 53

Conettix Communications Receiver/

Network Communications en 53

Gateway

 

 

 

12.2.3Conettix Datagram Type Differences

 

Notice!

i

Install software version 5.5C or later in the network device (C900TTL-E, D9133TTL-E, or

D6680) for the Datagram Type Function.

 

 

Software version 1.5D or later must be installed in the DX4020 or C900V2.

 

 

 

 

i

Notice!

If you are using a D6686 or D6100IPv6, the datagram section does not apply to the receiver

 

configuration.

 

 

 

Datagram 02

 

This datagram uses the IP address and the port number to identify and ACK packets from the

 

receiver to the field devices which allow multiple devices to be installed behind a single

 

outgoing IP address. This datagram type requires that CPU version 01.02.01 or later is

 

installed, and that receiver parameter 6.8.6 is programmed as 1.

 

To use this datagram type, program it in the following order:

 

1.

Confirm that D6200 version 1.20 or later is installed.

 

2.

Confirm that the D6600 CPU version 01.02.01 is loaded in the receiver.

 

3.

With the D6200 software, select Network → Network Configuration Management →

 

 

Read/Manage Network Configuration from Receiver.

 

4.

Select the 6.8 Global Parameters tab.

 

5.

Change the 6.8.6 6600 Datagram Type value to 1.

 

6.

Send the changes to the receiver and close the window.

 

7.

Select Network → Network Utilities → Network Device Setup and select the Telnet to

 

 

Device tab.

 

8.

Type or find the IP address of the D6680/D6682 in the list and establish a telnet session

 

 

with the D6680/D6682.

 

9.

After establishing the telnet session, select the channel(s) to use by pressing [1] or [2],

 

 

and then press Enter.

 

10.

Press Enter until you have selected Datagram and type 02, then press Enter, If both

 

 

channels are used, change both channels.

 

11.

Save the settings and exit from the D6680/D6682 setup.

 

Datagram 07

 

 

i

Notice!

This datagram is supported only on the E2‑RAD version of the D9133TTL-E Network Interface

 

Module.

 

 

 

This datagram type is used only in the NIM of the network device (D9133TTL-E, or DX4020).

 

The datagram type allows the Source and Destination ports to be set independently. This use

 

of a different source port allows NAT (Network Address Translation) tables of routers or

 

firewalls to direct packets to the correct NIM of the field device.

 

To use this datagram type, program in the following order:

 

1.

Telnet to the NIM of the field device as described in the appropriate network device

 

 

(D9133TTL-E or DX4020) installation guide.

 

2.

Select channel 1 of the NIM.

Bosch Security Systems, Inc.

Installation and Operation Guide

2012.11 08 4998122704

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Conettix Communications Receiver/Gate- way Page Table of contents Central Station Automation System Central Station Tips Network CommunicationsNo Data Received Reports Troubleshooting Guide Specifications Service Information Before Calling Emergency ProceduresBosch Security Systems, Inc. Product Manufacturing Dates IntroductionAbout documentation En Introduction Conettix Communications Receiver Gateway D6600/D6100IPv6 Supported Communication Formats 3System overviewConettix D6100IPv6 System Components Parts ListConettix D6600 System Components D6600 Quick InstallationAutomation PC and External Parallel Printer Connections AC Power and Telephone ConnectionsCallout ᅳ Description Date Setup D6600/D6100IPv6 Setting the Time and DateTime Setup D6600/D6100IPv6 D6600 Front Panel Card Functions and LocationsName Model Description Line Cards and ModulesSystem Trouble LED Status Solid Red or Yellow Clear D6600 Communications Receiver/Gateway Rear View D6600 Rear ViewD6600 Internal View Receiver Card PlacementD6100IPv6 Rear View D6100IPv6 Front PanelD6640/D6641 Line Cards and D6645 Line Terminator Cards D6600 Specific CardsFlash Pattern Color Function Card InstallationD6640/D6641 LED Descriptions Installing Line Cards Installing Terminator CardsD6640/D6641 Telephone Line Monitoring D6610 CPU Card and D6615 CPU Terminator CardReplacing the CPU Card Card Removal and ReplacementRemoving the CPU Card Printer Specifications Shipment D6600 only InstallationInstallation Check List Rack Mount Instructions Removing Power to the ReceiverPower Supply Modules Main Power PowerStandby Power Connecting External BatteriesDevice Qty Battery Standby UPS AC Standby Current Minimum Standby BatteryEstimated BTU Load Minimum Standby UPS PowerUPS Monitoring through CPU Programmable Input Ports Input and Output Ports10.1 Overview of Input and Output Ports Input Reverse Connection Configuration Input Default Connection ConfigurationTerminator Card Configuration 11.1 Process Flow D6600/D6100IPv6 OperationReporting Devices Primary and Secondary How Call Groups WorkBuzzer Operation 11.3 Operating in Manual Mode 11.2 Normal Operation Mode11.4 Keypad Menu Operation Using the KeypadLog Event Buffer DisplayKeypad Functions Software Version DisplayLCD/LED Availability Test Function Busy Seconds Line Busy ReportsClear Pending Events Function SIA Two-Way AudioTwo-Way Auto Modes of Operation Enhancements and ChangesPage Plement Network CommunicationsPanel NIC Callout ᅳ Description Host Computer for Conettix D6600/D6100IPv6 System Setup 12.1 Conettix D6600/D6100IPv6 Pre-installation RequirementsSetting Up the Host Computer OperationProtocol TCP/IP Select Start → Settings → Control PanelDouble-clickLocal Area connection Network administrator Page Page COM1 COM4 Network Failover Solution D6600 OnlyCallout Description Conettix Datagram Type Differences Internal IP Address Source Port Networking and EncryptionUpgrading Encryption Using Encryption for the First TimeUsing Two D6686/D6682/D6680 Modules in a System Obtaining the Latest D6200CD Software 12.3 Special Conettix D6600 ApplicationsD6680/D6682 No 12.4 D6100IPv6 Configuration Setup Instructions12.4.1 Factory Default IP Address 12.4.3 Obtaining an IP Address 12.4.4 Using the D6200 to configure the D6100IPv6Identifying the MAC Hardware Address FTP User Name admin FTP Password Pass Page Cidr D6100IPv6 I&O Guide 12.4.5 Configuring for Network Communication 12.5.1 Identifying the MAC Hardware Address 12.5 D6100i Configuration Setup Instructions12.5.2 Obtaining an IP Address EnterArp -s xxx.xxx.xxx.xxx zz-zz-zz-zz-zz-zz Initial IP Address Assignment Using ARP.EXESelect Start → Run Select Programs and Features Using Telnet to Finish the ConfigurationSelect Turn Windows Features on or off Click StartControl PanelProgramsConfiguration Using Telnet Page Steps below, type the correct value and press Enter Press Down to view the 6.2 Network adapter and press Enter 12.5.6 Configuring for Network CommunicationPress Enter1Enter Press Down to view 6.3.6 Network Automation Output FormatPress Enter to view 6.4.1 IP Address No Data Received Reports 13.2 Data Error13.1 No Data Received 13.3 Wrong DataReceiver system Direct Connect Central Station Automation SystemReceiver System Standard/Network Automation Central Station Tips 15.7 Test Communicator 15.6 Radio Frequency InterferenceSymptom Problem Solution Troubleshooting GuidePage Symptom Problem Solution Specifications LED Psdn D6600 and D6100IPv6 Listings and Approvals Emergency Data Sheet Service InformationReceiver Connected to Computer System? Yes No Page Page Bosch Security Systems, Inc
Related manuals
Manual 168 pages 55.61 Kb Manual 4 pages 782 b

D6600 specifications

Bosch Appliances is renowned for its innovative and high-quality home appliances, and the Bosch D6600 dishwasher perfectly embodies these values. Designed with the user in mind, the D6600 offers an exceptional cleaning experience combined with advanced technologies and practical features.

One of the standout features of the Bosch D6600 is its outstanding energy efficiency. It boasts an Energy Star certification, ensuring that it operates with minimal energy consumption while still delivering powerful cleaning performance. This not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to minimize their carbon footprint.

The D6600 employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and determine the level of dirtiness of dishes. This ensures that the dishwasher adjusts its wash cycles accordingly, providing a customized cleaning approach. This system guarantees thorough cleaning of even the toughest food residues, leaving dishes sparkling clean every time.

Quiet operation is another defining characteristic of the Bosch D6600. At just 44 dBA, it is one of the quietest dishwashers in its class, making it an ideal choice for open-concept living spaces or homes where noise is a concern. This level of noise is achieved thanks to Bosch’s insulation technology, which minimizes vibrations and sound emissions.

The dishwasher features a spacious and flexible interior, designed with Bosch’s RackMatic system. This innovative rack adjustment technology allows users to easily customize the loading capacity based on their needs. The top rack can be adjusted to three different heights, accommodating taller items in the bottom rack or larger cookware in the upper storage area.

Another highlight of the Bosch D6600 is its smart technology capabilities. Compatible with Home Connect, this feature enables users to control their dishwasher remotely via a smartphone app. Users can start cycles, receive notifications when the washing is complete, and even diagnose issues, enhancing convenience and user experience.

In addition to its efficient cleaning capabilities and user-friendly features, the Bosch D6600 also includes a robust sanitation option. The Sanitize feature raises water temperature to eliminate 99.9% of bacteria, ensuring that dishes not only look clean but are thoroughly sanitized.

With its combination of cutting-edge technology, energy efficiency, and thoughtful design, the Bosch D6600 dishwasher represents an outstanding choice for consumers seeking reliability and performance in their kitchen appliances. Whether washing everyday dishes or entertaining guests, this dishwasher exceeds expectations.
Top Page Image Contents