Bosch Appliances Complete Guide to the Bosch D6600 Home Security Receiver Manual

Page 64

64 en Network Communications

Conettix Communications Receiver/

 

Gateway

 

 

 

 

 

 

 

 

4.

Press Down to view 6.2.5 Network Adapter Enabled, and then verify it is a value of 2 and

 

 

press Enter. If the value is not 2, press Enter>[2]>Enter.

 

 

 

5.

If the D6100IPv6 has encryption enabled, press Down until viewing 6.2.6 Network

 

 

 

Encryption Enabled and set it to 1 using the same method as above.

 

 

 

 

 

i

Notice!

 

 

If using Network Automation, it is recommended that this be setup done using the D6200 af-

 

ter it can communicate with the D6100IPv6.

 

 

 

 

 

 

6.

Press Cancel and press Down until viewing 6.4 D6200 Network Connections, and then

 

 

press Enter.

 

 

 

7.

Press Enter to enter the IP address into 6.4.1 or Login Password into 6.4.6 of the host

 

 

computer that is running the D6200 Software.

 

 

 

 

 

 

 

Notice!

 

 

i

When entering an IP address through the keypad of the D6100IPv6, press the UP button for a

“.” in a IPv4 address and the DOWN button for a “:” in an IPv6. For example enter IP address

 

 

192.168.1.3 as: [1][9][2][∆][1][6][8][∆][1][∆][3][ENTER].

 

 

 

 

 

 

8.

Verify that 6.4.5 Network Programming Enable is a 1. If the value is not 1, press Enter

 

 

[1] Enter.

 

 

 

9.

Press Cancel repeatedly to return to the idle stage (the time and date show on the LCD).

12.5

D6100i Configuration Setup Instructions

 

 

 

The instructions in this section are for legacy D6100i modules.

 

 

12.5.1

Identifying the MAC Hardware Address

 

 

 

You must program the IP address of the module. The first step is to determine the MAC, or

 

hardware, address of the module. This address is hard-coded into the module during its

 

manufacture and cannot be changed. This address is 6 bytes (12 digits) long.

 

 

Figure 12.7: MAC Address Label Example

 

 

i

Notice!

The MAC address label is located on the rear of the module below the Ethernet port.

 

Record this number for future reference.

 

 

12.5.2

Obtaining an IP Address

 

Provide the module’s MAC address to the site’s network administrator, who then assigns an IP

 

address for the D6100IPv6.

2012.11 08 4998122704

Installation and Operation Guide

Bosch Security Systems, Inc.

Image 64
Contents Conettix Communications Receiver/Gate- way Page Table of contents No Data Received Reports Network CommunicationsCentral Station Automation System Central Station Tips Troubleshooting Guide Specifications Service Information Emergency Procedures Before CallingAbout documentation IntroductionBosch Security Systems, Inc. Product Manufacturing Dates En Introduction Conettix Communications Receiver Gateway 3System overview D6600/D6100IPv6 Supported Communication FormatsConettix D6600 System Components Parts ListConettix D6100IPv6 System Components Quick Installation D6600Callout ᅳ Description AC Power and Telephone ConnectionsAutomation PC and External Parallel Printer Connections Time Setup D6600/D6100IPv6 Setting the Time and DateDate Setup D6600/D6100IPv6 Card Functions and Locations D6600 Front PanelSystem Trouble LED Status Solid Red or Yellow Clear Line Cards and ModulesName Model Description D6600 Rear View D6600 Communications Receiver/Gateway Rear ViewReceiver Card Placement D6600 Internal ViewD6100IPv6 Front Panel D6100IPv6 Rear ViewD6600 Specific Cards D6640/D6641 Line Cards and D6645 Line Terminator CardsD6640/D6641 LED Descriptions Card InstallationFlash Pattern Color Function Installing Terminator Cards Installing Line CardsD6610 CPU Card and D6615 CPU Terminator Card D6640/D6641 Telephone Line MonitoringRemoving the CPU Card Card Removal and ReplacementReplacing the CPU Card Printer Specifications Installation Check List InstallationShipment D6600 only Removing Power to the Receiver Rack Mount InstructionsPower Power Supply Modules Main PowerStandby Power Connecting External BatteriesMinimum Standby Battery Device Qty Battery Standby UPS AC Standby CurrentMinimum Standby UPS Power Estimated BTU Load10.1 Overview of Input and Output Ports Input and Output PortsUPS Monitoring through CPU Programmable Input Ports Input Default Connection Configuration Input Reverse Connection ConfigurationTerminator Card Configuration D6600/D6100IPv6 Operation 11.1 Process FlowBuzzer Operation How Call Groups WorkReporting Devices Primary and Secondary 11.2 Normal Operation Mode 11.3 Operating in Manual ModeUsing the Keypad 11.4 Keypad Menu OperationLog Event Buffer DisplaySoftware Version Display Keypad FunctionsClear Pending Events Function Busy Seconds Line Busy ReportsLCD/LED Availability Test Function Two-Way Audio SIAEnhancements and Changes Two-Way Auto Modes of OperationPage Network Communications PlementPanel NIC Callout ᅳ Description 12.1 Conettix D6600/D6100IPv6 Pre-installation Requirements Host Computer for Conettix D6600/D6100IPv6 System SetupSetting Up the Host Computer OperationDouble-clickLocal Area connection Select Start → Settings → Control PanelProtocol TCP/IP Network administrator Page Page Network Failover Solution D6600 Only COM1 COM4Callout Description Conettix Datagram Type Differences Networking and Encryption Internal IP Address Source PortUsing Two D6686/D6682/D6680 Modules in a System Using Encryption for the First TimeUpgrading Encryption 12.3 Special Conettix D6600 Applications Obtaining the Latest D6200CD Software12.4.1 Factory Default IP Address 12.4 D6100IPv6 Configuration Setup InstructionsD6680/D6682 No Identifying the MAC Hardware Address 12.4.4 Using the D6200 to configure the D6100IPv612.4.3 Obtaining an IP Address FTP User Name admin FTP Password Pass Page Cidr D6100IPv6 I&O Guide 12.4.5 Configuring for Network Communication 12.5 D6100i Configuration Setup Instructions 12.5.1 Identifying the MAC Hardware Address12.5.2 Obtaining an IP Address EnterSelect Start → Run Initial IP Address Assignment Using ARP.EXEArp -s xxx.xxx.xxx.xxx zz-zz-zz-zz-zz-zz Using Telnet to Finish the Configuration Select Programs and FeaturesSelect Turn Windows Features on or off Click StartControl PanelProgramsConfiguration Using Telnet Page Steps below, type the correct value and press Enter 12.5.6 Configuring for Network Communication Press Down to view the 6.2 Network adapter and press EnterPress Enter1Enter Press Down to view 6.3.6 Network Automation Output FormatPress Enter to view 6.4.1 IP Address 13.2 Data Error No Data Received Reports13.1 No Data Received 13.3 Wrong DataCentral Station Automation System Receiver system Direct ConnectReceiver System Standard/Network Automation Central Station Tips 15.6 Radio Frequency Interference 15.7 Test CommunicatorTroubleshooting Guide Symptom Problem SolutionPage Symptom Problem Solution Specifications LED Psdn D6600 and D6100IPv6 Listings and Approvals Service Information Emergency Data SheetReceiver Connected to Computer System? Yes No Page Page Bosch Security Systems, Inc
Related manuals
Manual 168 pages 55.61 Kb Manual 4 pages 782 b

D6600 specifications

Bosch Appliances is renowned for its innovative and high-quality home appliances, and the Bosch D6600 dishwasher perfectly embodies these values. Designed with the user in mind, the D6600 offers an exceptional cleaning experience combined with advanced technologies and practical features.

One of the standout features of the Bosch D6600 is its outstanding energy efficiency. It boasts an Energy Star certification, ensuring that it operates with minimal energy consumption while still delivering powerful cleaning performance. This not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to minimize their carbon footprint.

The D6600 employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and determine the level of dirtiness of dishes. This ensures that the dishwasher adjusts its wash cycles accordingly, providing a customized cleaning approach. This system guarantees thorough cleaning of even the toughest food residues, leaving dishes sparkling clean every time.

Quiet operation is another defining characteristic of the Bosch D6600. At just 44 dBA, it is one of the quietest dishwashers in its class, making it an ideal choice for open-concept living spaces or homes where noise is a concern. This level of noise is achieved thanks to Bosch’s insulation technology, which minimizes vibrations and sound emissions.

The dishwasher features a spacious and flexible interior, designed with Bosch’s RackMatic system. This innovative rack adjustment technology allows users to easily customize the loading capacity based on their needs. The top rack can be adjusted to three different heights, accommodating taller items in the bottom rack or larger cookware in the upper storage area.

Another highlight of the Bosch D6600 is its smart technology capabilities. Compatible with Home Connect, this feature enables users to control their dishwasher remotely via a smartphone app. Users can start cycles, receive notifications when the washing is complete, and even diagnose issues, enhancing convenience and user experience.

In addition to its efficient cleaning capabilities and user-friendly features, the Bosch D6600 also includes a robust sanitation option. The Sanitize feature raises water temperature to eliminate 99.9% of bacteria, ensuring that dishes not only look clean but are thoroughly sanitized.

With its combination of cutting-edge technology, energy efficiency, and thoughtful design, the Bosch D6600 dishwasher represents an outstanding choice for consumers seeking reliability and performance in their kitchen appliances. Whether washing everyday dishes or entertaining guests, this dishwasher exceeds expectations.