ENGLISH
Disc operations
Playing a disc in the receiver
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
If the current disc is an audio CD, CD Text, MP3/WMA, or VCD without PBC, all tracks will be played repeatedly until you change the source or eject the disc.
•If a title list or disc menu appears while playing a DVD or VCD with PBC, see “Disc menu operations” on page 23.
The following marks are used to indicate
the playable discs....
DVD Video | Video CD with PBC |
| only |
Before performing any operations, make
sure the following....
•Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the audio CD, CD Text, and MP3/ WMA playback by referring to the monitor screen. (See pages 27 and 28.)
•For DVD playback, you can change the Setup Menu setting to your preference. (See pages 29 – 31.)
•The operations explained on pages 20 – 31 are using the remote controller.
•When you want to operate the DVD/CD player using the buttons on the control panel, see “Other disc operations” on pages 32 – 34.
If “
” appears on the monitor when pressing a button, the receiver cannot accept an operation you have tried to do.
•In some cases, without showing “
,” operations will not be accepted.
Video CD with/without | Audio CD/ |
PBC | CD Text |
MP3/WMA disc | All discs listed here |
•Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
18