Canceling the display
demonstrations
If no operations are done for about 20 seconds, display demonstration starts.
[Initial: DEMO
1
2
3
4Finish the procedure.
Setting the clock
1
2Set the hour and minute.
1 Select “CLOCK H” (hour), then adjust the hour.
2Select “CLOCK M” (minute), then adjust the minute.
3Select “24H/12H” (minute), then select “24H” (hour) or “12H” (hour).
3Finish the procedure.
ENGLISH
To check the current clock time when the power is turned off
To activate the display demonstration
In step 3 above...
11