ENGLISH
Selecting a preset station using the preset station list
If you forget what stations are stored in which preset numbers, you can check the preset station list, then select your desired station.
1 Select the band (FM1 – 3, AM).
Each time you press the button, the band changes as follows:
FM1 
FM2 
FM3 
AM
2 Press and hold 5 (up) or ∞ (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.
The current station will be highlighted on the display.
Notes:
•You can show the other FM band preset station lists (FM1, FM2, or FM3) by pressing 5(up) or ∞(down).
•If a name has been assigned to a station (see page 43), it will be shown instead of the station frequency.
3 Select the number (1 – 6) for the preset station you want.
Changing the display pattern
By pressing D DISP, you can change the information shown on the display.
Each time you press the button, the display patterns change as follows:
Ex.: When selecting preset station 1 of FM1 band
Large animation display
Current sound mode (iEQ) (see page 25)
Small animation display 1
Clock time
Small animation display 2
If a name has been assigned to a station it will be shown instead of “NO NAME.”
Clock time display
14