JVC KD-AR3000, KD-LH300 manual To drop the volume in a moment, To turn off the power

ENGLISH

To drop the volume in a moment		2 Press number button 1 to select
Press	briefly while listening to any	“MOVIE”—Movie category of the
source. “ATT” starts flashing on the display, and		PSM settings.
the volume level will drop in a moment.		The “Graphics” setting screen appears on
To resume the previous volume level, press the		the display.
button briefly again.
• If you turn the control dial, you can also restore
the sound.

To turn off the power

Press and hold for more than one second.

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Canceling the display demonstration

When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.

•It is recommended to cancel the display demonstration before you use the unit for the first time.

To cancel the display demonstration, follow

the procedure below:

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 36 and 37.)

The next-step-operation buttons start flashing.

3 Select “Off.”

4 Finish the setting.

To activate the display demonstration, repeat

the same procedure and select “All Demo” or “Int Demo” in step 3.

•For more details, see “To show the graphics on the display—Graphics” on page 38.

8