JVC KD-AR3000 Activating the graphic screen using either picture or movie, Setting, Select User

ENGLISH

6 Press number button 3 to start erasure.	3 Select “Opening” (opening screen
“Now Deleting...” appears while
	setting) or “Ending” (ending screen
erasing the selected file. When
	setting).
erasure is over, the name list of the
stored file appears again.

7 To delete more files, repeat from steps 5 and 6.

8Press D DISP to resume the source indication

screen.

Activating the downloaded images and animations

Activating the animations stored for opening and ending screens

After the unit turns on or before the unit turns off, you can see preset animations on the display. These are called opening screen and ending screen. You can use your own edited animations for these opening and ending screens.

•Before performing the following procedure, make sure that “KeyIn CFM” is set to “On”; otherwise, the animations may not be shown. (See page 38.)

•If no animation is stored in “Opening” and “Ending,” “Opening” and “Ending” cannot be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 36 and 37.)

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

The “Graphics” setting screen appears on the display.

Ex.: When you select “Opening”

4 Select “User.”

•Default: Factory-preset animation is used.

•User: Your own edited animation is used.

5 Finish the setting.

Activating the graphic screen using either picture or movie

Using this setting, you can change the graphic displays. These graphic screen appears if no operation is done for about 20 seconds.

•If no image is stored in “Picture,” or no animation in “Movie,” “UserPict.,” “UserMovie,” and “UserSlide” cannot be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 36 and 37.)

34