JVC KD-LH300, KD-AR3000 manual Setting the clock

Setting the clock 4 Set the minute.

You can also set the clock system to either 24 hours or 12 hours.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 36 and 37.)

1Select “Clock Min” (minute).

2 Adjust the minute.

1 2

ENGLISH

The next-step-operation buttons	5 Set the clock system.
start flashing.
	1 Select “24H/12H.”
2 Press number button 2 to select	2 Select “24Hours” or “12Hours.”
	1	2
“CLOCK”—Clock category of the
PSM settings.
The “Clock Hr” (hour) setting screen
appears on the display.
	6 Finish the setting.

To check the clock time when the unit is

turned off, press D DISP.

3 Adjust the hour.

The power turns on and the clock time is shown for about 5 seconds, then the power turns off.

9