What is ImageLink?
When an MP3 or a WMA folder includes an image <jml> file edited by Image Converter (supplied in the
•While reading an image <jml> file, no sounds come out (“Image Link” is shown on the display during this period).
Album 1 | Music001.mp3 |
(Folder 1) | Music002.mp3 |
| |
| Music003.mp3 |
| Photo1.jml |
Album 2 | Music004.wma |
(Folder 2) | Music005.mp3 |
| |
| Music006.wma |
| Photo2.jml |
| Photo3.jml |
Display window | Display window |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Photo1.jmlPhoto2.jml
If there are more than one <jml> file in a folder, a <jml> file with younger playback order number will be shown on the display (in the above example, “Photo2.jml” will be used for Album 2).
To activate ImageLink, follow the procedure below:
•See also “Changing the general settings (PSM)” on page 36.
1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2Press number button 1 to select “MOVIE”— Movie category of the PSM settings.
The “Graphics” setting screen appears on the display.
3Turn the control dial to select “ImageLink.”
4Press SEL (select) to finish the setting. ImageLink starts functioning when the next folder starts playing.
Note:
ImageLink will not work in the following cases:
•If no <jml> file is included in an MP3/WMA folder.
•If Intro Scan is activated.
•If the source is changed to any other than “CD,” or
•If you turn off then on the unit while “Image Link” is shown on the display.
ENGLISH
17