JVC KD-LH401 service manual To change the FM tuner selectivity -IF Filter

	Note:
	If you change the setting from “Off” to
	“On” while playing an MP3/WMA
	track, the tag display will be activated
	when the next track starts playing.
• Off:	Turns off the ID3 tag display while
	playing MP3/WMA tracks. (Only the
	folder name and track name can be
	shown.)

To change the FM tuner selectivity —IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•	Auto:	When this type of interference
		occurs, this unit automatically
		increases the tuner selectivity so that
		interference noise will be reduced.
		(But the stereo effect will also be
		lost.)
•	Wide:	Subject to the interference from
		adjacent stations, but sound quality
		will not be degraded and the stereo
		effect will not be lost.

To turn the key-touch tone on or off—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

•	On:	Activates the key-touch tone.
•	Off:	Deactivates the key-touch tone.

To select the external component to use —Ext Input

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component—to use.

•	Changer:	To use the CD changer.
•	Line In:	To use the external component
		other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

To select the telephone muting—Telephone

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “Muting1” or “Muting2,” whichever mutes the sounds from this unit.

•Muting1: Selects this if this setting can mute the sounds while using the cellular phone.

•Muting2: Selects this if this setting can mute the sounds while using the cellular

	phone.
• Off:	Cancels the telephone muting.

To select the amplifier gain control —Amp.Gain

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “LowPower” to prevent them from being damaged.

•LowPower: You can adjust the volume level from “Volume 00” to “Volume 30.”

Note:

If you change the setting from “HighPower” to “LowPower” while listening at a volume level more than 30, the unit automatically changes the volume level to “Volume 30.”

•HighPower: You can adjust the volume level from “Volume 00” to “Volume 50.”

To turn the slot light on or off—SlotLight

You can turn off the slot light if you do not want the illumination each time you insert/eject the disc or when you change the control panel angle.

•	On:	Activates the illumination.
•	Off:	Deactivates the illumination.

ENGLISH

49