JVC KD-LH401 To stop play and eject the disc, Display indications when inserting an audio

ENGLISH

Display indications when inserting an audio	Display indications when inserting an MP3
CD or a CD Text:	or a WMA discs:

Total track number and total playing time of the inserted CD

Current track and elapsed playing time

Notes:

•MP3 or WMA discs require a longer readout time. (It differs due to the complexity of the folder/track configuration.)

•The unit cannot read or play an MP3 track without the extension code <.mp3>, and a WMA track without the extension code <.wma>.

Total folder and track numbers

MP3 indicator*

Current folder/track and elapsed playing time

*WMA or MP3 indicator lights up depending on the first detected track.

To stop play and eject the disc

Press 0 (eject).

Disc play stops and the control panel moves down. The disc automatically ejects from the loading slot. The source changes to the previously selected source.

•If you change the source or turn the power off, disc play also stops (without ejecting the disc). Next time you select “CD” as the source or turn the power on, disc play starts from where playback has been stopped previously.

To return the control panel to its previous

position, press 0 (eject) again.

•If you keep the loading slot fully open for about 1 minute, (beeps sound when the “Beep” setting is turned “On”—see page 49) the control panel automatically returns to its previous position.

Be careful not to get the disc or your finger caught in between the control panel and the unit.

Notes:

•If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

(Disc play will not start this time.)

•You can eject the disc even when the unit is turned off.

24