JVC KD-LH401 service manual Troubleshooting, Symptoms Causes Remedies

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

		Symptoms	Causes	Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and connections.
	•	This unit does not work	The built-in microcomputer	Press the reset button on the
		at all.	functions incorrectly due to	control panel. (Your preset
General			noise, etc.	adjustments will also be
				erased.) (See page 2.)
	•	“Panel Connect Error”	The control panel is not attach	Remove the control panel, wipe
		appears on the display.	correctly and firmly.	the connectors, then attach it
				again. (See page 55.)
	• When “Reset P00” to		There is something blocking the	Press the reset button on the
		“Reset P44” appears on	control panel movement.	control panel. (See page 2.) If
		the display.		the reset button does not work,
				check the installation. (Ex. you
				have used a screw which is
				longer than specified.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
Tuner		Sequential Memory)
		automatic preset does
		not work.
	•	Static noise while	The aerial is not connected	Connect the aerial firmly.
		listening to the radio.	firmly.
	• Disc cannot be played back.		Disc is inserted upside down.	Insert the disc correctly.
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/
		played back.		CD-RW.
	• Tracks on the CD-R/			• Finalize the CD-R/CD-RW
		CD-RW cannot be		with the component which
		skipped.		you used for recording.
	•	Disc cannot be ejected.	Disc is locked.	Unlock the disc. (See page 30.)
Playback	•	Disc cannot be	The CD player may function	While pressing
		recognized (“No Disc,”	incorrectly.	(standby/on attenuator), press
		“Loading Error,” or “Eject		and hold 0 (eject) for more than
		Error” flashes on the		2 seconds to eject the disc.
Disc		display.)		Before re-inserting a disc, wait
				for several seconds.
	• Disc sound is sometimes		You are driving on rough roads.	Stop playback while driving on
		interrupted.		rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and connections.
	•	“No Disc” flashes on the	No disc in the loading slot.	Insert a disc into the loading slot.
		display.
			Disc is inserted incorrectly.	Insert the disc correctly.

ENGLISH

71