JVC KD-LH401 service manual To drop the volume in a moment, To turn off the power

Page 69

ENGLISH

To drop the volume in a moment

2 Press number button 1 to select

Press

briefly while listening to any

“MOVIE”—Movie category of the

source. “ATT” starts flashing on the display, and

PSM settings.

the volume level will drop in a moment.

The “Graphics” setting screen appears on

To resume the previous volume level, press the

the display.

button briefly again.

• If you turn the control dial, you can also restore

the sound.

To turn off the power

Press and hold for more than one second.

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Canceling the display demonstration

When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.

•It is recommended to cancel the display demonstration before you use the unit for the first time.

To cancel the display demonstration, follow

the procedure below:

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 46 and 47.)

The next-step-operation buttons start flashing.

3 Select “Off.”

4 Finish the setting.

To activate the display demonstration, repeat

the same procedure and select “Int Demo” or “All Demo” in step 3.

•For more details, see “To show the graphics on the display—Graphics” on page 48.

8

Image 69

Contents KD-LH401 Specification Section Precaution Preventing static electricity Grounding to prevent damage by static electricityHandling the traverse unit optical pickup Important for laser products Reproduction and Position of LabelsSection Specific Service Instructions Removing the heat sink See Main body section Removing the front panel assembly SeeReference Removing the top chassis assembly See Figs.3 toRemoving the mechanism control board See Removing the front chassis See Figs.7Removing the CD mechanism assembly See Removing the main board See Figs.11Top chassis Removing the rear bracket See Removing the gear bracket unit SeeFPC guide Removing the front board See Figs.15 to Rear cover assembly PCD Mechanism section Removing the top cover See Figs.1 Removing the connector board See Figs.3 to DET Removing the DET switch See Figs.6Removing the chassis unit See Figs.8 Removing the clamper assembly See Figs.10 Removing the loading / feed motor assembly See Figs.12 Reattaching the pickup unit See Figs.14 to Removing the pickup unit See Figs.14 toRemoving the trigger arm See Figs.19 Removing the top plate assembly SeeRemoving the mode sw. / select lock arm See Figs.22 Reference Reassembling the mode sw. / select lock arm See Figs.24 toReattaching the Select arm R / link plate See Figs.29 Removing the select arm R / link plate See Figs.27Removing the loading roller assembly See Figs.31 to Removing the loading gear 5, 6 and 7 See Figs.35 Pull out the feed gear Removing the gears See Figs.37 toRemoving the turn table / spindle motor See Figs.41 „ Dummy load „ Standard volume positionFeed section Focus section Spindle sectionTracking section Signal processing section Replacement of laser pickup Maintenance of laser pickupANT No.MA0631-33 Victor Company of JAPAN, Limited Contents No.MA063SCH 2004/4CD-ROM No.SML200404 Safety precaution X571 IC573IC572 IC571Main amplifier section Standard schematic diagramsSN74AHCU04PW-X CD servo control sectionC823 LCD & Key control sectionMain board Printed circuit boardsMecha control board Front boardM O No.MA063SCH Parts List Exploded view of general assembly and parts list Main board C32 General Assembly CD mechanism assembly and parts list CD mechanism Electrical parts list QERF1CM-226Z Capacitor Part Name Description Local R74 NRSA63J-101X Front board TA E Capacitor Micon control board NRSA63J-4R7X MG Resistor Part Name Description Local R685 NRSA63J-682X Memo Packing materials and accessories parts list Packing and Accessories KD-LH401 Important for Laser Products How to reset your unitContents Control panel Location of the ButtonsIllumination Navigation for easy operations Control dial ¢ buttonsRemote controller Remove the battery holder Installing the batteryReturn the battery holder Place the batteryCurrent sound mode iEQ see Adjust the sound as you want. See pages 32Basic Operations Select the sourceTo turn off the power To drop the volume in a momentAdjust the hour Set the minute Setting the clockTo check the clock time when the unit is Set the clock systemListening to the radio Radio OperationsSearching for a station automatically Auto search Start searching for a stationEach time you press Button, the band changes as Follows Searching for a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStart automatic preset Storing stations in memoryManual preset Tune in to a station in this example, of 92.5 MHzEach time you press the button, the band changes as follows Selecting a preset station directly Selecting a preset station using the preset station listSelect the number 1 6 for the preset station you want Changing the display pattern When receiving an AM or non FM RDSStation See the following pagesRDS Operations What you can do with RDSTo use Network-Tracking Reception PTY Stnby standby setting screen Appears on the display Using TA Standby ReceptionTo select your favorite PTY code for PTY Standby Reception Using PTY Standby ReceptionTo set PTY Standby Reception Select one of the twenty-nine PTY codes. SeeTo store your favorite programme types Searching for your favorite programmeTo store your favorite programme types, see To search for your favorite programme typeTo search for your favorite programme Setting the TA volume level Other convenient RDS functions and adjustmentsAutomatic clock adjustment To activate programme search, follow the procedure belowSame programme can be received on different frequencies PTY codesAbout MP3 and WMA discs Disc OperationsPlaying a disc Open the control panelTo stop play and eject the disc Display indications when inserting an audioCD or a CD Text Or a WMA discs To return the control panel to its previousTo activate ImageLink, follow the procedure below What is ImageLink?Particular portion on a disc Locating a track or aTo go to the next or previous tracks To go to a track quickly¢ or 4 after selecting the folder To select a particular track in a folder, pressSelecting a folder and start playback Selecting a track and start playbackSelect the number 1 6 for the folder you want to play Select the number 1 6 for the track you want to playTo play back tracks repeatedly Repeat Play To play back tracks at random Random PlayTo cancel intro scan, select Intro Off by To cancel the prohibition and unlock the discProhibiting disc ejection To play back only intros Intro ScanTag is set to Off While playing an audio CD or a CD Text discCurrent track NumberAdjusting the sound Sound AdjustmentsMake adjustments Select the item you want to adjustTo adjust the input level of each source -Vol Adj Selecting preset sound modes iEQ intelligent equalizerPress SEL select once Available sound modesPress the number button to select the sound mode you want Sound modes preset frequency level settingsTo cancel the sound mode, select Flat To exit from the sound mode selectionSelect the sound mode you want to adjust Storing your own sound modes 4 Make adjustments as you likeStore the adjustment you made Enter the sound adjustment modeMeter ViewShake OffGraphic Displays Install / Start the programImport the images Retouch and edit the imagesPress M Mode after the disc is detected Downloading images and animationsPress number button 6 to show the download selection screen You can assign your own names when editing a CD-R If you want to cancel the procedureIf it is OK, press number button 1 to start downloading Select highlight a file you want to downloadFile name appears, and the unit will Ask you Download OK? AgainTo delete all the stored files at a time Deleting unwanted filesTime, and Movie To delete the files stored for OpeningAgain To delete the stored files for Picture one by oneEx. When you select Opening Activating the graphic screen using either picture or movieGraphics setting screen appears on Display Activating the downloaded images and animationsTo cancel all graphic displays, select Off in step Select a file you want Finish the settingSelect UserMovie, UserSlide, or UserPict Select UserPictAdjust Basic ProcedureOther Main Functions Ex. To change ContrastPreferred Setting Mode PSM items Indications Selectable values/items TA VolumePTY Stnby AF-Regn’lTo show the graphics on the display -Graphics To adjust the display contrast level -ContrastTo select the display illumination pattern -LCD Type To turn the tag display on or off-TagTo change the FM tuner selectivity -IF Filter To select the external component to use -Ext InputTo select the amplifier gain control -Amp.Gain Set the dimmer mode as you like Select the source that you want to Setting the desired color for each sourceSet the display color for Press and hold SEL select for moreOne of the user color adjustment screens appears Select the user color adjustment screenYou can adjust within the range of 00 to Creating your own color-UserAssigning names to the sources When you select a source, the power Automatically comes onTo erase the entered characters Sources Maximum number CharactersControl panel angles changes as follows Changing the control panel angleConnectors Detaching the control panelAttaching the control panel CD Changer Operations Playing discsSelect the CD changer CD-CH To go to a particular disc directly To change the display patternTo fast-forward or reverse the track Selected disc number Current track and elapsed playing timeTo skip to the next or previous folder only for MP3 discs Disc name list Folder name list Track name list Selecting a disc/folder/track using the name listsDisplay can show only six names at a time Selected disc numberFor MP3 discs For CDs For MP3 discs For CDs Mode Active Plays at randomTo cancel repeat play, select Repeat Off by Mode Active Plays repeatedlyMode changes as follows For MP3 discs For CDs Mode ActiveTurn on the connected component and start playing the source External Component OperationsDAB Tuner Operations What is DAB system?Select the DAB tuner Select the DAB band DAB1, DAB2, or DAB3To tune in to a particular ensemble without searching Start searching for an ensembleTo stop searching before an ensemble is To restore the FM/AM tuner Storing DAB services in memoryTo cancel the DRC effect, select DRC Off To select the next service To select the previous serviceSelecting a preset service using the preset service list ServiceWhat you can do more with Using Announcement Standby ReceptionRoad Traffic News Standby Reception TA Standby Reception For Announcement Standby ReceptionHow Announcement Standby Reception works To activate Announcement Standby ReceptionAnnouncement type Travel Programmes about travelWhile receiving a DAB service Searching for your favorite serviceTo use Alternative Reception While receiving an FM RDS stationChanging the display pattern Symptoms Causes Remedies TroubleshootingMP3/WMA track although it has Noise is generated Track played back is not anWma Longer readout time is Readout time varies due toAccented letters Available charactersGraphics CD Changer Upper case Lower caseHandling discs MaintenanceFM Tuner SpecificationsMW Tuner LW TunerRefer to page of How to reset your unit Siehe Seite Zurücksetzen des GerätsZie de pagina met de paragraaf Het apparaat terugstellen Die folgenden Teile werden zusammen mit Und Erdung ausgelegt. Verfügt IhrDiesem Gerät geliefert Nach ihrer Überprüfung, die Teile richtig einsetzenRemarque HinweisFuse blows Sound is distortedAlvorens de verbindingen tot stand te Avant de commencer la connexion VérifiezKD-LH401 Pour l’amplificateur seulementOder KS-U57 *4 KD-LH401

Related manuals

Manual 77 pages 41.92 Kb