JVC KD-LH401 service manual Removing the chassis unit See Figs.8

3.2.4 Removing the chassis unit (See Figs.8 and 9)

•Prior to performing the following procedure, remove the top cover and connector board.

(1)Remove the two suspension springs (L) and (R) attaching the chassis unit to the frame.

CAUTION:

•The shape of the suspension spring (L) and (R) are dif- ferent. Handle them with care.

•When reassembling, make sure that the three shafts on the underside of the chassis unit are inserted to the dampers certainly.

Chassis unit

Suspension spring (R)	Suspension spring (L)
	Frame

Suspension spring (R)

Fig.8

Chassis unit

Shafts

Damper

Damper

Fig.9

Suspension spring (L)

Shaft

Damper

Frame

1-16 (No.MA063)