JVC KD-LX100 manual To cancel Advanced SCM SCM Link, To set the clock display Clock Disp

Page 19

To cancel Advanced SCM — SCM LINK

You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources.

When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.

•

LINK ON:

Advanced SCM (different

 

 

sound modes for different

 

 

sources)

•

LINK OFF:

Conventional SCM (one

 

 

sound mode for all sources)

To set the clock display — CLOCK DISP

You can set the clock to be shown on the lower part of the display when the unit is turned on. When shipped from the factory, the clock is set to be shown on the display.

• CLOCK ON:

Clock display is turned on.

•CLOCK OFF: Clock display is turned off. When “CLOCK OFF” is selected, the current sound mode setting (see page 15) is shown on the upper part of the display*.

*If an external source is selected, the current sound mode setting is shown on the lower part of the display.

To select the level meter — LEVEL

You can select the level meter display according to your preference. When shipped from the factory, “NORMAL” is selected.

• NORMAL:

Normal audio level meter

 

(illuminates from bottom to

 

top).

• MIRROR:

Volume level meter

 

illuminates as if it were

 

reflected on a mirror.

• LEVEL OFF:

Level meter stays lit and does

 

not change its illumination.

• ALL OFF:

Level meter turns off.

To select the dimmer mode — DIMMER

When you turn on the car headlights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer is

activated.

 

• AUTO:

Activates Auto Dimmer.

•

OFF:

Cancels Auto Dimmer.

•

ON:

Always dims the display.

Note on Auto Dimmer:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To turn on/off the key-touch tone — BEEP SW

 

ENGLISH

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch

tone is activated.

 

• BEEP ON:

Activates the key-touch tone.

 

• BEEP OFF:

Deactivates the key-touch

 

 

tone.

 

To select the scroll mode — SCROLL

You can select the scroll mode for the disc information if it consists of more than 10

characters. When shipped from the factory, Auto

Scroll mode is set to “ONCE.”

• ONCE:

Scrolls only once.

•

AUTO:

Repeats the scroll

 

 

(in 5-second intervals).

•

OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1 second.

To change the AM/FM channel intervals

—AREA

When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM (AREA US settings).

You will have to change the channel intervals when using this unit in an area other than North America and South America.

• AREA EU:

Select this when using this

 

unit in an area other than

 

North and South America.

 

(9 kHz for AM and 50 kHz (for

 

manual tuning) / 100 kHz (for

 

searching) for FM)

• AREA US:

Select this when using this

 

unit in North or South

 

America. (10 kHz for AM and

 

200 kHz for FM)

Note:

 

If the channel intervals settings are changed, the following will occur.

•The names assigned to the stations will be erased from memory. To reassign the names, see “Assigning names to the sources” on pages 22.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For customer Use KD-LX100Precautions How to reset your unitInformation For U.S.A Contents Location of the Buttons How to use the number buttonsControl panel Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderTo turn off the power To drop the volume in a momentBasic Operations Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchSelect the FM band FM1-3 you want to store FM stations into FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune into a station you want while M is flashingSelect the band FM1 Tuning into a preset stationManual preset Select the number 1 6 for the preset station you wantInsert a disc into the loading slot Playing a CDTo stop play and eject the CD Open the loading slotTo play back tracks at random Random Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyPlaying a CD Text Select text display mode while playing a CD TextTo cancel the prohibition and unlock the CD Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustTurning on/off the Bbeii function Using the sound control memoryPress Mode Select the sound mode you wantIndication For Preset values Storing your own sound adjustmentsTo reset to the factory settings Repeat the same procedure to adjust other sound modesOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To set the clock display Clock Disp To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To select the scroll mode ScrollTo select the external component to use To turn the demo mode on or offIf Audio Cruise does not function correctly To adjust the volume increase rateSelect a character Assigning names to the sourcesTo erase the input characters Available charactersTo go to the next track or the previous tracks CD Changer OperationsPlaying CDs Select the CD automatic changerPlays at random Random1 Random2 CanceledTo go to a particular disc directly To show the CD Text informationIntro1 Intro2 Canceled Repeat1 Repeat2 CanceledOperate the external component Select the external componentSymptoms Causes Remedies TroubleshootingHandling CDs MaintenanceFM Tuner SpecificationsAM Tuner Call Deutsch No message appears on the display Eject ERR or Eject Error appears on the displayKD-LX300 KD-LX100 Nota Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo Be sure to ground this unit to the car’s chassisPrecautions sur l’alimentation et la connexion des enceintes KD-LX100
Top Page Image Contents