ENGLISH
Assigning names to the sources
You can assign names to station frequencies and CDs. After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of the |
| characters |
|
|
Station frequencies | Up to 10 characters (up to |
| 30 station frequencies |
| including both FM and AM) |
|
|
CDs * and | Up to 32 characters (up to |
CD changer * | 40 discs) |
|
|
* You cannot assign a name to a CD Text.
3
4
Select a character.
About the available characters, see below.
Move the cursor to the next (or previous) character position.
1 Select a source you want to assign a name to.
2 Press and hold SEL (select) for more than 2 seconds while pressing DISP.
5 Repeat steps 3 and 4 until you finish inputting the name.
6 Press the button while the last selected character is flashing.
The input name is stored in memory.
When you select a station frequency as the source:
When you select the CD as the source:
To erase the input characters
Insert spaces using the same procedure described above.
Available characters
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
|
|
|
|
|
|
|
|
|
|
U | V | W | X | Y | Z | 0 | 1 | 2 | 3 |
|
|
|
|
|
|
|
|
|
|
4 | 5 | 6 | 7 | 8 | 9 | – | / | < | > |
|
|
|
|
|
|
|
|
|
|
space
Notes:
•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
22