JVC KD-LX100 manual Precautions sur l’alimentation et la connexion des enceintes

Page 35
Orange with white stripe Naranja con rayas blancas Orange avec bande blanche
Blue with white stripe Azul con rayas blancas Bleu avec bande blanche

ENGLISH

ESPAÑOL

FRANÇAIS

PRECAUTIONS on power supply and speaker connections:

DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.

Connect the black lead (ground), yellow lead (to car battery, constant 12 V), and red lead (to an accessory terminal) correctly.

BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.

If the speaker wiring in your car is as illustrated in Fig. 1 and Fig. 2 below, DO NOT connect the unit using that original speaker wiring. If you do, the unit will be seriously damaged. Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig. 3.

If the speaker wiring in your car is as illustrated in Fig. 3, you can connect the unit using the original speaker wiring in your car.

If you are not sure of the speaker wiring of your car, consult your car dealer.

+

+

+

+

L -

-

L -

-

+

+

+

+

R -

-

R -

-

Fig. 1

Fig. 2

Fig. 3

PRECAUCIONES sobre las conexiones de la fuente de alimentación y de los altavoces:

NO conecte los conductores de altavoz del cable de alimentación a la batería de automóvil, pues podrían producirse graves daños en la unidad.

Conecte correctamente el conductor negro (a tierra), el conductor amarillo (a la batería del automóvil, 12 V constantes), y el conductor rojo (a un terminal de accesorio).

ANTES de conectar a los altavoces los conductores de altavoz del cable de alimentación, verifique el conexionado de altavoz de su automóvil.

Si el conexionado de altavoz de su automóvil es como se indica en las Fig. 1 y Fig. 2 de abajo, NO conecte la unidad utilizando ese conexionado de altavoz original. Si lo hace, se producirán daños graves en la unidad.

Vuelva a efectuar el conexionado de altavoz de manera que pueda conectar la unidad a los altavoces de la manera indicada en la Fig. 3.

Si el conexionado de altavoz de su automóvil es como se indica en la Fig. 3, podrá conectar la unidad utilizando el conexionado de altavoz original de su automóvil.

Si tiene dudas sobre el conexionado de altavoz de su automóvil, consulte con su concesionario.

PRECAUTIONS sur l’alimentation et la connexion des enceintes:

NE CONNECTEZ PAS les fils d’enceintes du cordon d’alimentation à la batterie; sinon, l’appareil serait sérieusement endommagé.

Connectez correctement le fil noir (a la masse), le fil jaune (a la batterie de la voiture,12 V constant) et le fil rouge (à la prise accessoire).

AVANT de connecter les fils des enceintes du cordon d’alimentation aux enceintes, vérifiez le câblage des enceintes de votre voiture.

Si le câblage des enceintes de votre voiture est réalisé comme montré sur la Fig. 1 ou Fig. 2 ci-dessous, NE CONNECTEZ PAS l’appareil en utilisant ce câblage original d’enceintes. Si vous le faites, l’appareil sera sérieusement endommagé.

Recommencez le câblage des enceintes de façon que vous puissiez connecter l’appareil aux enceintes comme montré sur la Fig. 3.

Si le câblage des enceintes de votre voiture est comme montré sur la Fig. 3, vous pouvez connecter l’appareil en utilisant ce câblage original d’enceintes pour votre voiture.

Si vous n’êtes pas sûrs du câblage d’enceintes de votre voiture, consulter le concessionnaire de votre voiture.

Connecting the leads / Conexión de los conductores / Raccordement des fils

Twist the core wires when connecting.

Solder the core wires to connect them securely.

Retuerce los alambres de alma para

Suelde los alambres de alma para conectarlos con

conectarlos.

firmeza.

Torsader les âmes des fils en les

Souder les âmes desfils pour les raccorder entre eux

raccordant.

de façon sûre.

CAUTION / PRECAUCION / PRECAUTION:

To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con cinta aislante.

Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés avec de la bande isolante.

ATypical Connections / Conexiones tipicas / Raccordements typiques

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.

1Connect the colored leads of the power cord to the car battery, speakers and power antenna (if any) in the following sequence.

1Black: ground

2Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to power antenna (200 mA max.)

5 Orange with white stripe: to car light control switch

6 Others: to speakers

2Connect the antenna cord.

3Finally connect the wiring harness to the unit.

Antes de la conexión: Verifique atentamente el conexionado del vehículo. Una conexión incorrecta podría producir daños graves en la unidad.

1Conecte los conductores de color del cable de alimentación a la batería del automóvil, altavoces y antena motriz (si la hubiere) en la secuencia siguiente.

1Negro: a tierra

2Amarillo: a la batería del automóvil (12 V constantes)

3 Rojo: a un terminal de accesorio

4 Azul con rayas blancas: a la antena motriz (máx. 200 mA)

5 Naranja con rayas blancas: al interruptor de control de las luces del automóvil

6 Otros: a los altavoces

2Conecte el cable de antena.

3Por último, conecte el cable de alimentación a la unidad.

Avant de commencer la connexion: vérifiez attentivement le câblage du véhicule. Une connexion incorrecte peut endommager sérieusement l’appareil.

1Connectez les fils de couleur du cordon d’alimentation à la batterie de la voiture, aux enceintes et à l’antenne automatique (s’il y en a une) dans l’ordre suivant.

1Noir: à la masse

2Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à la prise accessoire

4 Bleu avec bande blanche: à l’antenne automatique

(200 mA max.)

5 Orange avec bande blanche: à l’interrupteur d’éclairage de la voiture

6 Autres: aux enceintes

2Connectez le cordon d’antenne.

3Finalement, connectez le faisceau de fils à l’appareil.

Antenna terminal

To antenna

2

 

Terminal de la antena

A la antena

JVC CD changer jack

Borne de l’antenne

A l’antenne

Jack para el cambiador de CD de JVC

 

 

 

Prise CD changeur JVC

15

15 A fuse Fusible de 15 A Fusible 15 A

When connecting a CD changer, we recommend that you connect one of the CH-X series CD changers.

• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).

ONLY FOR KD-LX100:You can also use an external component such as a portable MD player by connecting the Line Input Adaptor KS-U57 (not supplied). (See diagram B )

Cuando conecte un cambiador de CD, se recomienda utilizar uno de la serie CH-X.

• Si su cambiador de CD es de la serie KD-MK, necesitará un cable opcional (KS-U15K).

SOLO PARA KD-LX100: Conectando el adaptador de entrada de línea KS-U57 (no suministrado), también podrá usar un componente exterior, tal como un reproductor de MD. (Véase diagrama B )

Lors de la connexion d’un changeur CD, nous vous recommandons d’utiliser un des changeurs CD de la série CH-X.

Si votre changeur appartient à la série KD-MK, vous avez besoin d’un cordon optionnel (KS-U15K). SEULEMENT POUR LE KD-LX100: Vous pouvez aussi utiliser un appareil extérieur tel qu’un lecteur de MD en connectant l’adaptateur d’entrée de ligne KS-U57 (non fourni) (voir le diagramme B ).

Rear ground terminal Terminal de tierra posterior Borne arrière de masse

To subwoofer (see diagram B )

Al subwoofer (véase diagrama B )

Au caisson de grave (voir le diagramme B )

Line out/in (see diagram B ) Salida/entrada de línea (véase diagrama B ) Sortie/entrée de ligne

(voir le diagramme B ) 1

3

Black

Negro

Noire

Yellow*1

Amarillo*1

Jaune*1

Red

Rojo

Rouge

To metallic body or chassis of the car

1 A un cuerpo metálico o chasis del automóvil Vers corps métallique ou châssis du véhicule

To a live terminal in the fuse block connecting to the car battery (bypassing the ignition switch)

A un terminal activo del bloque de fusibles conectado a la batería

2del automóvil (desviando el interruptor de encendido)

A une borne sous tension du porte-fusible connectée à la batterie de la voiture (en dérivant l’interrupteur d’allumage)

To an accessory terminal in the fuse block

Ignition switch

* Interruptor de encendido Interrupteur d’allumage

*

Fuse block

*1: Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.

*1: Antes de comprobar el funcionamiento de esta unidad previa a de la instalación, es necesario conectar este cable, de lo contrario no se podrá conectar la alimentación.

3A un terminal accesorio del bloque de fusibles Vers borne accessoire du porte-fusible

To power antenna if any 4A la antena motriz, si la hubiere

Vers l’antenne automatique, s’il y en a une

Bloque de fusibles

Porte-fusible

*Not included with this unit.

No suministrado con esta unidad. Non fourni avec cet appareil.

*1: Pour vérifier le fonctionnement de cet appareil avant installation, ce fil doit être raccordé, sinon l’appareil ne peut pas être mis sous tension.

To car light control switch

(ILLUMINATION) 5Al interruptor de control de las luces del automóvil À l’interrupteur d’éclairage de la voiture

6

White with black stripe

 

 

 

 

 

White

Gray with black stripe

 

 

 

 

 

Gray

Green with black stripe

 

 

 

 

 

 

 

 

 

 

 

 

Blanco con rayas negras

 

 

 

 

Blanco

Gris con rayas negras

 

 

 

 

Gris

Verde con rayas negras

 

 

 

 

 

 

 

 

Blanc avec bande noire

 

 

 

 

Blanc

Gris avec bande noire

 

 

 

 

Gris

Vert avec bande noire

 

Left speaker (front)

Right speaker (front)

Altavoz izquierdo (frontal)

Altavoz derecho (frontal)

Enceinte gauche (avant)

Enceinte droit (avant)

Green

Purple with black stripe

Purple

Verde

Púrpura con rayas negras

Púrpura

Vert

Violet avec bande noire

Violet

Left speaker (rear)

Right speaker (rear)

Altavoz izquierdo (trasero)

Altavoz derecho (trasero)

Enceinte gauche (arrière)

Enceinte droit (arrière)

Image 35
Contents For customer Use KD-LX100Information For U.S.A How to reset your unitPrecautions Contents Control panel How to use the number buttonsLocation of the Buttons Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderBasic Operations To drop the volume in a momentTo turn off the power Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchSelect the FM band FM1-3 you want to store FM stations into FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune into a station you want while M is flashingSelect the band FM1 Tuning into a preset stationManual preset Select the number 1 6 for the preset station you wantInsert a disc into the loading slot Playing a CDTo stop play and eject the CD Open the loading slotTo play back tracks at random Random Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyPlaying a CD Text Select text display mode while playing a CD TextTo cancel the prohibition and unlock the CD Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustTurning on/off the Bbeii function Using the sound control memoryPress Mode Select the sound mode you wantIndication For Preset values Storing your own sound adjustmentsTo reset to the factory settings Repeat the same procedure to adjust other sound modesOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To set the clock display Clock Disp To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To select the scroll mode ScrollTo select the external component to use To turn the demo mode on or offIf Audio Cruise does not function correctly To adjust the volume increase rateSelect a character Assigning names to the sourcesTo erase the input characters Available charactersTo go to the next track or the previous tracks CD Changer OperationsPlaying CDs Select the CD automatic changerPlays at random Random1 Random2 CanceledTo go to a particular disc directly To show the CD Text informationIntro1 Intro2 Canceled Repeat1 Repeat2 CanceledOperate the external component Select the external componentSymptoms Causes Remedies TroubleshootingHandling CDs MaintenanceAM Tuner SpecificationsFM Tuner Call Deutsch No message appears on the display Eject ERR or Eject Error appears on the displayKD-LX300 KD-LX100 Nota Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo Be sure to ground this unit to the car’s chassisPrecautions sur l’alimentation et la connexion des enceintes KD-LX100