Alpine CDA-9853, CDA-9855 owner manual Adjusting and Storing the Parametric Equalizer Curve, 16-EN

Page 17

Adjusting and Storing the Parametric Equalizer Curve

You can modify the Equalizer settings to create a response curve more appealing to your personal taste.

To adjust the parametric equalizer curve, set the EQ mode to PEQ. For details, refer to “Setting User's EQ mode” (page 15).

1Press and hold MENU for at least 2 seconds.

2Select the Parametric EQ (User’s EQ) mode by sliding your finger on the GlideTouch bar to the left or right.

Press the GlideTouch bar under the Parametric EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND1

4Select the frequency by sliding your finger on the GlideTouch bar to the left or right.

Adjustable frequency bands:

20Hz to 20kHz (in 1/3 octave steps)

5Adjust the level by turning the Rotary encoder. Adjustable level: -6 to + 6 dB

6Press SOURCE/POWER to set the band width (Q). Adjustable band width: 1.0, 1.5, 3.0

7To adjust another band, repeat steps 3 to 6 and adjust all bands.

8When the setting has been completed, press FUNC. or the GlideTouch bar to activate the preset mode.

9Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desire preset for at least 2 seconds to store the adjusted contents.

10After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•The frequencies of adjacent bands cannot be adjusted within 4 steps.

•This function is inoperable when DEFEAT is set to ON (page 15).

•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no peration is performed in 60 seconds, the unit will return to the normal mode.

Adjusting and Storing the Graphic Equalizer Curve

You can modify the equalizer settings to create a response curve more appealing to your personal taste. To adjust the graphic equalizer curve, set the EQ mode to GEQ. For details, refer to “Setting User's EQ mode” (page 15).

1Press and hold MENU for at least 2 seconds.

2Select the Graphic EQ (User’s EQ) mode by sliding your finger on the GlideTouch bar to the left or right.

Press the GlideTouch bar under the Graphic EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND6 → BAND7 → BAND1

4Adjust the level by turning the Rotary encoder. Adjustable output level: -6 to + 6 dB

5To adjust another band, repeat steps 3 and 4, then adjust all bands.

6When the setting has been completed, press FUNC. or the GlideTouch bar to activate the preset mode.

7Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desire preset for at least 2 seconds to store the adjusted contents.

8After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•This function is inoperable when DEFEAT is set to ON (page 15).

•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no peration is performed in 60 seconds, the unit will return to the normal mode.

16-EN

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CDA-9855 CDA-9853 Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Move your finger on the GlideTouch bar to the left or right About the GlideTouch Bar OperationTouch or press the desired position on the GlideTouch bar Setting Time CDA-9853 only Turning Power On and OffPress SOURCE/POWER to turn on the unit Getting StartedDisplay Tilt Adjustment Adjusting VolumeLowering Volume Quickly Opening and Closing the Movable DisplayAutomatic Memory of Station Presets Manual Storing of Station PresetsRadio Changing the Radio Frequencies for each CountryCD / MP3 / WMA Tuning to Preset StationsStation Title Search Function Freqency Search FunctionPress the Glide Touch bar under RPT to select the RPT mode Press FUNC. to activate the audio function modeRepeat Play 11-ENScanning Programs X. Random PlaySearching from CD Text File/Folder Name Search concerning MP3/ WMAFile Name Search mode Folder Name Search modeQuick Search About MP3/WMA14-EN TerminologyEqualizer Presets Sound SettingSetting Users EQ mode 15-EN16-EN Adjusting and Storing the Parametric Equalizer CurveAdjusting and Storing the Graphic Equalizer Curve Recalling the Stored Equalizer Curve Way modeAbout the Crossover 17-ENPress SOURCE/POWER to adjust the slope Adjusting and Storing the Crossover SettingsAdjust the output level by turning the Rotary encoder WAY SystemAbout Time Correction Recalling the Stored Crossover SettingsExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsAdjusting and Storing the Time Correction Setting the Time Correction UnitDisplay Setup menu is displayed 20-EN21-EN Recalling the Stored Time Correction SettingsSetting the MX Mode Displaying the Title/Text Other Functions22-EN Press Title23-EN About the indicator display CDA-9853 onlyAbout Title and Text TitleTitling Discs/Stations Blackout Mode On and Off CDA-9855 onlyErasing Disc Title/Station Title Displaying TimeDisplaying the External Amplifier Information Setting Amplifier LinkIf a Mono Amplifier is Connected If a 4ch Amplifier is Connected26-EN About i-PersonalizeIf you want to use colors other than the above Data downloading starts Data Downloading27-EN 28-EN General Setting29-EN Tuner SettingAudio Setting 30-EN Display SettingDemo Setting SAT Radio Receiver Optional Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberQuick Search Function Receiving Stored ChannelsChannel/Category Search Function Changing the Display33-EN Setting the Auxiliary Data Field DisplaySearching by Playlist Searching for a desired SongSearching by artist name 34-ENSearching by album name Random Play Shuffle M.I.X35-EN To search for an album of the selected artist36-EN Displaying the TextSong will be played back repeatedly Each press changes the displayControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 38-ENInformation Battery ReplacementCase of Difficulty Basic40-EN Indication for CD PlayerIndication for CD Changer Indication for SAT Receiver Mode41-EN Call42-EN SpecificationsIndication for iPod Mode 43-EN Installation and Connections44-EN InstallationSlide the mounting sleeve into the dashboard Removal45-EN Connections46-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 47-ENCHA-1214 CHM-S630 CHA-S634Limited Warranty Page Page Page
Top Page Image Contents