Alpine CDA-9853, CDA-9855 owner manual Never Attempt the Following

Page 5

PRECAUTIONS

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Installation Location

Make sure the CDA-9855/CDA-9853 will not be installed in a location subjected to:

•Direct sun and heat

•High humidity and water

•Excessive dust

•Excessive vibrations

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Center Hole

Center Hole

New

 

 

Disc

Bumps

 

Outside

 

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECTCORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet Disc Stabilizer

4-EN

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CDA-9855 CDA-9853 Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Move your finger on the GlideTouch bar to the left or right About the GlideTouch Bar OperationTouch or press the desired position on the GlideTouch bar Setting Time CDA-9853 only Turning Power On and OffPress SOURCE/POWER to turn on the unit Getting StartedDisplay Tilt Adjustment Adjusting VolumeLowering Volume Quickly Opening and Closing the Movable DisplayAutomatic Memory of Station Presets Manual Storing of Station PresetsRadio Changing the Radio Frequencies for each CountryCD / MP3 / WMA Tuning to Preset StationsStation Title Search Function Freqency Search FunctionPress the Glide Touch bar under RPT to select the RPT mode Press FUNC. to activate the audio function modeRepeat Play 11-ENScanning Programs X. Random PlaySearching from CD Text File/Folder Name Search concerning MP3/ WMAFile Name Search mode Folder Name Search modeQuick Search About MP3/WMA14-EN TerminologyEqualizer Presets Sound SettingSetting Users EQ mode 15-EN16-EN Adjusting and Storing the Parametric Equalizer CurveAdjusting and Storing the Graphic Equalizer Curve Recalling the Stored Equalizer Curve Way modeAbout the Crossover 17-ENPress SOURCE/POWER to adjust the slope Adjusting and Storing the Crossover SettingsAdjust the output level by turning the Rotary encoder WAY SystemAbout Time Correction Recalling the Stored Crossover SettingsExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsAdjusting and Storing the Time Correction Setting the Time Correction UnitDisplay Setup menu is displayed 20-EN21-EN Recalling the Stored Time Correction SettingsSetting the MX Mode Displaying the Title/Text Other Functions22-EN Press Title23-EN About the indicator display CDA-9853 onlyAbout Title and Text TitleTitling Discs/Stations Blackout Mode On and Off CDA-9855 onlyErasing Disc Title/Station Title Displaying TimeDisplaying the External Amplifier Information Setting Amplifier LinkIf a Mono Amplifier is Connected If a 4ch Amplifier is Connected26-EN About i-PersonalizeIf you want to use colors other than the above Data downloading starts Data Downloading27-EN 28-EN General Setting29-EN Tuner SettingAudio Setting 30-EN Display SettingDemo Setting SAT Radio Receiver Optional Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberQuick Search Function Receiving Stored ChannelsChannel/Category Search Function Changing the Display33-EN Setting the Auxiliary Data Field DisplaySearching by Playlist Searching for a desired SongSearching by artist name 34-ENSearching by album name Random Play Shuffle M.I.X35-EN To search for an album of the selected artist36-EN Displaying the TextSong will be played back repeatedly Each press changes the displayControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 38-ENInformation Battery ReplacementCase of Difficulty Basic40-EN Indication for CD PlayerIndication for CD Changer Indication for SAT Receiver Mode41-EN Call42-EN SpecificationsIndication for iPod Mode 43-EN Installation and Connections44-EN InstallationSlide the mounting sleeve into the dashboard Removal45-EN Connections46-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 47-ENCHA-1214 CHM-S630 CHA-S634Limited Warranty Page Page Page
Top Page Image Contents