Alpine CDA-9853, CDA-9855 owner manual Specifications, Indication for iPod Mode, 42-EN

Page 43

Indication for iPod Mode

NO IPOD

The iPod is not connected.

-Make sure the iPod is correctly connected. Make sure the cable is not bent excessively.

The iPod’s battery remains low.

-Refer to the iPod’s documentation and charge the battery.

NO FILE

There are no songs in the iPod.

-Download songs to the iPod and connect to the CDA-9855/ CDA-9853.

Error 01

(CDA-9855)

 

 

ERROR-01

(CDA-9853)

 

 

Communication error

-Turn the ignition key off, and then set to ACC or ON again.

-Check the display by reconnecting between the iPod and the adapter, using the iPod cable.

Error 02

(CDA-9855)

 

 

 

 

ERROR-02

(CDA-9853)

 

 

Caused by the iPod Software Version not being compatible with the adapter KCA-420i (sold separately).

-Refer to the Owner's Manual of the adapter KCA-420i (sold separately) and update the iPod Software Version to be compatible with the adapter KCA-420i (sold separately).

Specifications

FM TUNER SECTION

 

Tuning Range

 

Area 1

87.7-107.9 MHz

Area 2

87.5-108.0 MHz

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity

80 dB

Signal-to-Noise Ratio

80 dB

Stereo Separation

45 dB

Capture Ratio

2.0 dB

AM TUNER SECTION

 

Tuning Range

 

Area 1

530-1,710 kHz

Area 2

531-1,602 kHz

Sensitivity (IEC Standard)

22.5 µV/27 dB

CD PLAYER SECTION

 

Frequency Response

5 – 20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

PICKUP

 

Wave length

795 nm

Laser power

CLASS I

REMOTE CONTROL

 

Battery Type

AAA batteries (2 pcs.)

Width

42 mm (1-21/32")

Height

121 mm (4-25/32")

Depth

23 mm (29/32")

Weight

50 g (1.8 oz)

GENERAL

 

Power Requirement

14.4 V DC

 

(11–16 V allowable)

Power Output

18 W RMS 4*

*Primary amplifier ratings per CEA-2006 Standard

Power output: measured at 4 Ohms and 1% THD+N

S/N: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage

4 V/10 k ohms (CDA-9855)

 

2 V/10 k ohms (CDA-9853)

Weight

1.6 kg (3 lbs. 8 oz)

CHASSIS SIZE

 

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6")

NOSEPIECE SIZE

 

Width

170 mm (6-11/16")

Height

46 mm (1-13/16")

Depth

19 mm (11/16")

Due to continuous product improvement, specifications and design are subject to change without notice.

42-EN

Image 43
Contents CDA-9855 CDA-9853 Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Touch or press the desired position on the GlideTouch bar About the GlideTouch Bar OperationMove your finger on the GlideTouch bar to the left or right Getting Started Turning Power On and OffSetting Time CDA-9853 only Press SOURCE/POWER to turn on the unitOpening and Closing the Movable Display Adjusting VolumeDisplay Tilt Adjustment Lowering Volume QuicklyChanging the Radio Frequencies for each Country Manual Storing of Station PresetsAutomatic Memory of Station Presets RadioFreqency Search Function Tuning to Preset StationsCD / MP3 / WMA Station Title Search Function11-EN Press FUNC. to activate the audio function modePress the Glide Touch bar under RPT to select the RPT mode Repeat PlayFile/Folder Name Search concerning MP3/ WMA X. Random PlayScanning Programs Searching from CD TextAbout MP3/WMA Folder Name Search modeFile Name Search mode Quick Search14-EN Terminology15-EN Sound SettingEqualizer Presets Setting Users EQ modeAdjusting and Storing the Graphic Equalizer Curve Adjusting and Storing the Parametric Equalizer Curve16-EN 17-EN Way modeRecalling the Stored Equalizer Curve About the CrossoverWAY System Adjusting and Storing the Crossover SettingsPress SOURCE/POWER to adjust the slope Adjust the output level by turning the Rotary encoderExample 2. Listening Position All Seats Recalling the Stored Crossover SettingsAbout Time Correction Example 1. Listening Position Front Left Seat20-EN Setting the Time Correction UnitAdjusting and Storing the Time Correction Display Setup menu is displayedSetting the MX Mode Recalling the Stored Time Correction Settings21-EN Press Title Other FunctionsDisplaying the Title/Text 22-ENTitle About the indicator display CDA-9853 only23-EN About Title and TextDisplaying Time Blackout Mode On and Off CDA-9855 onlyTitling Discs/Stations Erasing Disc Title/Station TitleIf a 4ch Amplifier is Connected Setting Amplifier LinkDisplaying the External Amplifier Information If a Mono Amplifier is ConnectedIf you want to use colors other than the above About i-Personalize26-EN 27-EN Data DownloadingData downloading starts 28-EN General SettingAudio Setting Tuner Setting29-EN Demo Setting Display Setting30-EN Checking the SAT Radio ID Number Storing Channel PresetsSAT Radio Receiver Optional Receiving Channels with the SAT Radio Receiver OptionalChanging the Display Receiving Stored ChannelsQuick Search Function Channel/Category Search Function33-EN Setting the Auxiliary Data Field Display34-EN Searching for a desired SongSearching by Playlist Searching by artist nameTo search for an album of the selected artist Random Play Shuffle M.I.XSearching by album name 35-ENEach press changes the display Displaying the Text36-EN Song will be played back repeatedlyMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional38-EN Remote ControlControls on Remote Control Operating the Audio ProcessorBasic Battery ReplacementInformation Case of Difficulty40-EN Indication for CD PlayerCall Indication for SAT Receiver ModeIndication for CD Changer 41-ENIndication for iPod Mode Specifications42-EN 43-EN Installation and ConnectionsRemoval Installation44-EN Slide the mounting sleeve into the dashboard45-EN Connections46-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 47-ENCHA-1214 CHM-S630 CHA-S634Limited Warranty Page Page Page