Alpine CDA-9853, CDA-9855 owner manual Opening and Closing the Movable Display, Adjusting Volume

Page 9

Opening and Closing the Movable Display

Press c.

The movable display will open.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

To close the movable display, press c again.

The movable display will close.

•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

•The display will stop at the set tilt angle when closing.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Display Tilt Adjustment

The movable display may be adjusted to 3 different angles depending upon user preference.

1Press MENU.

2Select TILT (TILT ADJUST) by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under TILT (TILT ADJUST).

3Touch UP or DOWN on the GlideTouch bar to adjust the display angle.

•Selecting RETURN will return to the previous screen.

Movable display

4After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•The adjusted tilt angle of the display is stored in memory. There is no need to re-adjust the tilt angle when the power is turned back on.

•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press MUTE to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing MUTE again will bring the audio back to its previous level.

Detaching and Attaching the Front Panel

Detaching

1Turn off the unit power.

2Press (Release) at the upper left side until the front panel pops out.

3Grasp the left side of the front panel and pull it out.

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching

1Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2Push the left side of the front panel until it locks firmly into the main unit.

2

1

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.

8-EN

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CDA-9855 CDA-9853 Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW About the GlideTouch Bar Operation Touch or press the desired position on the GlideTouch barMove your finger on the GlideTouch bar to the left or right Setting Time CDA-9853 only Turning Power On and OffPress SOURCE/POWER to turn on the unit Getting StartedDisplay Tilt Adjustment Adjusting VolumeLowering Volume Quickly Opening and Closing the Movable DisplayAutomatic Memory of Station Presets Manual Storing of Station PresetsRadio Changing the Radio Frequencies for each CountryCD / MP3 / WMA Tuning to Preset StationsStation Title Search Function Freqency Search FunctionPress the Glide Touch bar under RPT to select the RPT mode Press FUNC. to activate the audio function modeRepeat Play 11-ENScanning Programs X. Random PlaySearching from CD Text File/Folder Name Search concerning MP3/ WMAFile Name Search mode Folder Name Search modeQuick Search About MP3/WMA14-EN TerminologyEqualizer Presets Sound SettingSetting Users EQ mode 15-ENAdjusting and Storing the Parametric Equalizer Curve Adjusting and Storing the Graphic Equalizer Curve16-EN Recalling the Stored Equalizer Curve Way modeAbout the Crossover 17-ENPress SOURCE/POWER to adjust the slope Adjusting and Storing the Crossover SettingsAdjust the output level by turning the Rotary encoder WAY SystemAbout Time Correction Recalling the Stored Crossover SettingsExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsAdjusting and Storing the Time Correction Setting the Time Correction UnitDisplay Setup menu is displayed 20-ENRecalling the Stored Time Correction Settings Setting the MX Mode21-EN Displaying the Title/Text Other Functions22-EN Press Title23-EN About the indicator display CDA-9853 onlyAbout Title and Text TitleTitling Discs/Stations Blackout Mode On and Off CDA-9855 onlyErasing Disc Title/Station Title Displaying TimeDisplaying the External Amplifier Information Setting Amplifier LinkIf a Mono Amplifier is Connected If a 4ch Amplifier is ConnectedAbout i-Personalize If you want to use colors other than the above26-EN Data Downloading 27-ENData downloading starts 28-EN General SettingTuner Setting Audio Setting29-EN Display Setting Demo Setting30-EN SAT Radio Receiver Optional Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberQuick Search Function Receiving Stored ChannelsChannel/Category Search Function Changing the Display33-EN Setting the Auxiliary Data Field DisplaySearching by Playlist Searching for a desired SongSearching by artist name 34-ENSearching by album name Random Play Shuffle M.I.X35-EN To search for an album of the selected artist36-EN Displaying the TextSong will be played back repeatedly Each press changes the displayControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 38-ENInformation Battery ReplacementCase of Difficulty Basic40-EN Indication for CD PlayerIndication for CD Changer Indication for SAT Receiver Mode41-EN CallSpecifications Indication for iPod Mode42-EN 43-EN Installation and Connections44-EN InstallationSlide the mounting sleeve into the dashboard Removal45-EN Connections46-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 47-ENCHA-1214 CHM-S630 CHA-S634Limited Warranty Page Page Page
Top Page Image Contents