
Data Downloading
1Insert the
2Press MENU.
3Select the Download mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Download mode.
4Select Download (YES) by pressing the GlideTouch bar under Download (YES).
Data search of the disc starts and the first file name is displayed.
•If you want to cancel the data search, press the GlideTouch bar under CANCEL (NO).
•If a file is not found by a data search, “No File” is indicated.
•The “No File” display will automatically disappear if no operation is performed for 5 seconds.
5Select the file to download by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired file.
Data downloading starts.
6When data download is finished successfully, the confirmation screen is displayed (for the
PARAMETRIC EQ or Graphic EQ data*
The data is memorized in Preset 6 of Parametric EQ mode or Graphic EQ mode. The memorized data settings in Preset 6 (Parametric EQ mode or Graphic EQ mode) are automatically applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of
You cannot download the data if the setting of the 2WAY/3WAY switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction mode. The memorized data settings in Preset 6 (Time Correction mode) are automatically applied.
*If the downloaded parametric EQ or graphic EQ differs from the current EQ mode, Preset 6 setting will not change automatically. Change the EQ mode and recall Preset 6.
*If data is downloaded while setting DEFEAT to ON, Preset 6 setting will not change automatically. Recall Preset 6 in the EQ mode.
7Press and hold MENU for at least 2 seconds to return to normal mode.
•When you download the data again, the data is overwritten in Preset 6.
•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.
•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.
SETUP
You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from General Setting, Tuner Setting, etc., to select your desired setting.
SOURCE/ |
|
POWER | Rotary encoder |
BAND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g |
|
| f | GlideTouch bar | |||
| |||||||
| MENU |
|
|
The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu.
1Press MENU.
2Select SETUP by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under SETUP.
The main SETUP menu is displayed.
3Select the desired item by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under your selection.
GENERAL ↔ TUNER ↔ AUDIO ↔ DISPLAY ↔ DEMO The SETUP menu of the selected item is displayed.
4Select the desired item by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under your selection.
GENERAL
CLOCK MODE*1 ↔ CLOCK ADJUST ↔ PLAY MODE ↔ BEEP ↔ INT MUTE ↔ INT AUDIO ↔ AUX IN ↔ (AUX NAME)*2 ↔
TUNER
TUNER MODE ↔ TUNER AREA*3 ↔ XM ADF*4 ↔
TUNER MODE
AUDIO
SUBWOOFER ↔ SUBW CH ↔ SUBW SYSTEM*5 ↔ EQ MODE*6 ↔ TW SETUP*7 ↔ A.PROC TYPE ↔
SUBWOOFER
DISPLAY
DIMMER ↔ DIMMER LEVEL ↔ SCROLL TYPE ↔ TEXT SCROLL ↔ FONT SELECT ↔
↔DIMMER
DEMO
DEMO