Alpine CDA-9853, CDA-9855 owner manual Indication for CD Player, 40-EN

Page 41

CD

CD Player/Changer not functioning.

•Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press c. After the error display disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3/WMA

MP3 or WMA is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (page 13-14), then rewrite in the format supported by this device.

Indication for CD Player

High Temperature

(CDA-9855)

 

 

 

HIGH-TEMP

 

(CDA-9853)

 

 

 

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

No Disc

(CDA-9855)

 

(CDA-9853)

NO DISC

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

1)Press the c button.

The movable display will open.

2)Press the c button again for at least 2 seconds while the movable display is open.

Error

(CDA-9855)

 

(CDA-9853)

ERROR

•Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error display remains after ejecting, press the c button again.

If the error display still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If the disc cannot be ejected by pressing c, press the RESET switch (refer to page 7) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

PROTECT

•A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

UNSUPPORT

•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

40-EN

Page 40 Page 42
Image 41
Page 40 Page 42
Contents CDA-9855 CDA-9853 Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Move your finger on the GlideTouch bar to the left or right About the GlideTouch Bar OperationTouch or press the desired position on the GlideTouch bar Setting Time CDA-9853 only Turning Power On and OffPress SOURCE/POWER to turn on the unit Getting StartedDisplay Tilt Adjustment Adjusting VolumeLowering Volume Quickly Opening and Closing the Movable DisplayAutomatic Memory of Station Presets Manual Storing of Station PresetsRadio Changing the Radio Frequencies for each CountryCD / MP3 / WMA Tuning to Preset StationsStation Title Search Function Freqency Search FunctionPress the Glide Touch bar under RPT to select the RPT mode Press FUNC. to activate the audio function modeRepeat Play 11-ENScanning Programs X. Random PlaySearching from CD Text File/Folder Name Search concerning MP3/ WMAFile Name Search mode Folder Name Search modeQuick Search About MP3/WMA14-EN TerminologyEqualizer Presets Sound SettingSetting Users EQ mode 15-EN16-EN Adjusting and Storing the Parametric Equalizer CurveAdjusting and Storing the Graphic Equalizer Curve Recalling the Stored Equalizer Curve Way modeAbout the Crossover 17-ENPress SOURCE/POWER to adjust the slope Adjusting and Storing the Crossover SettingsAdjust the output level by turning the Rotary encoder WAY SystemAbout Time Correction Recalling the Stored Crossover SettingsExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsAdjusting and Storing the Time Correction Setting the Time Correction UnitDisplay Setup menu is displayed 20-EN21-EN Recalling the Stored Time Correction SettingsSetting the MX Mode Displaying the Title/Text Other Functions22-EN Press Title23-EN About the indicator display CDA-9853 onlyAbout Title and Text TitleTitling Discs/Stations Blackout Mode On and Off CDA-9855 onlyErasing Disc Title/Station Title Displaying TimeDisplaying the External Amplifier Information Setting Amplifier LinkIf a Mono Amplifier is Connected If a 4ch Amplifier is Connected26-EN About i-PersonalizeIf you want to use colors other than the above Data downloading starts Data Downloading27-EN 28-EN General Setting29-EN Tuner SettingAudio Setting 30-EN Display SettingDemo Setting SAT Radio Receiver Optional Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberQuick Search Function Receiving Stored ChannelsChannel/Category Search Function Changing the Display33-EN Setting the Auxiliary Data Field DisplaySearching by Playlist Searching for a desired SongSearching by artist name 34-ENSearching by album name Random Play Shuffle M.I.X35-EN To search for an album of the selected artist36-EN Displaying the TextSong will be played back repeatedly Each press changes the displayControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 38-ENInformation Battery ReplacementCase of Difficulty Basic40-EN Indication for CD PlayerIndication for CD Changer Indication for SAT Receiver Mode41-EN Call42-EN SpecificationsIndication for iPod Mode 43-EN Installation and Connections44-EN InstallationSlide the mounting sleeve into the dashboard Removal45-EN Connections46-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 47-ENCHA-1214 CHM-S630 CHA-S634Limited Warranty Page Page Page
Top Page Image Contents