Repeat Play
1 Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Source operation mode* → Source select mode
*
2 Press the GlideTouch bar under RPT to select the RPT mode.
The track (file) will be played back repeatedly.
CD mode :
↓
RPT : Only a track is repeatedly played back
↓ *1
RPT: A disc is repeatedly played back
↓
(off)
*1 When a CD changer is connected.
•If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
↓
RPT : Only a file is repeatedly played back
↓
RPT: Only files in a folder are repeatedly played back
↓*2
RPT: A disc is repeatedly played back
↓
(off)
*2 When an MP3 compatible CD changer is connected.
The RPT mode is cancelled if off is selected.
•The function mode you previously recalled can be recalled again if the GlideTouch bar is touched.
•If no operation is performed for 10 seconds, the audio function mode turns off.
M.I.X. (Random Play)
1 Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Source operation mode* → Source select mode
*
2 Press the GlideTouch bar under MIX to select the Random Play mode.
The tracks (files) will be played back in random sequence.
CD mode :
↓
M.I.X. : Track are played back in
random sequence.
↓ *3
M.I.X.: The tracks on all the CDs in the current magazine will be included in the random playback sequence.
*3 When a CD changer equipped with the All M.I.X. function is connected.
•If M.I.X. is set to ON during 
RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
↓
M.I.X.: Only files in a folder are played back in random sequence.
↓
M.I.X.: Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.
The Random Play mode is cancelled if off is selected.
•The function mode you previously recalled can be recalled again if the GlideTouch bar is touched.
•If no operation is performed for 10 seconds, the audio function mode turns off.
Scanning Programmes
1 Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Source operation mode* → Source select mode
*
2 Press the GlideTouch bar under SCAN to select the Scan mode.
The first 10 seconds of each of track (file) will be played back in succession.
3 If the desired song is found, perform steps 1 and 2 to stop scanning.
•The function mode you previously recalled can be recalled again if the GlideTouch bar is touched.
•If no operation is performed for 10 seconds, the audio function mode turns off.