Alpine CDA-9853R, CDA-9855R Erasing Disc Title/Station Title, Setting Amplifier Link, 26-EN

Page 27

7 Press TITLE to record the title.

If you cancel while entering a title, selected characters are not written.

You can enter 18 radio station titles (24 for the CDA-9853R model) and 18 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted.

The CD Changer title length or memory capacity varies depending upon the model being used.

When you want to erase a title, enter a space (and symbol “ ” for the CDA-9853R model).

The operations described in steps 3 to 6 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.

Erasing Disc Title/Station Title

1 Press TITLE to select the Title Display. Then, press again and hold for at least 2 seconds.

For details, see asterisk 1 of “Displaying the Title/Text” (page 24).

2 Within 10 seconds, press and hold -/Jfor at least 2 seconds.

The title in the display will blink.

3 Within 10 seconds, press gor frepeatedly until the title you want to erase is displayed.

4 Within 10 seconds, press and hold -/Jfor at least 2 seconds to erase the title displayed.

5 Press TITLE to cancel the title erasing mode.

You cannot erase CD-TEXT.

“TITLE NO DATA” (“NO DATA”) is displayed for 2 seconds if the title is not input in step 2, or all titles are erased in step 4.

Blackout Mode On and Off (CDA-9855R only)

When Blackout mode is turned on, the display will turn off to reduce power consumption.

This additional power enhances the sound quality.

Press and hold FUNC. for at least 2 seconds to activate the blackout mode.

The display will turn off.

If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.

To cancel Blackout mode, press and hold FUNC. for at least 2 seconds.

Setting Amplifier Link

When an Amplifier Link compatible amplifier (MRD-M1005 or MRD-M605, etc.) is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 amplifiers can be adjusted.

1 Press and hold MENU for at least 2 seconds.

2 Select the Amplifier Link (A-LINK) mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Amplifier Link (A-LINK) mode.

3 Select the AMP-ID (AMP-1 to AMP-8) to be adjusted by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired AMP-ID.

The input level mode to be adjusted is activated.

If a Mono Amplifier is Connected

4 Adjust the input level by sliding your finger on the

GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level.

If a 4ch Amplifier is Connected

4 Adjust the input level of CH 1/2 by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level.

5 Adjust the input level of CH 3/4 by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level.

6 When adjustment has been completed, press and hold MENU for at least 2 seconds to return to normal mode.

For details of each of the settings, refer to the Owner's Manual of the external amplifier.

If amplifier settings are made on the unit, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the unit.

“No Link” is displayed if the amplifier is removed or its power cannot be turned on, etc.

If multiple amplifiers are connected to this unit, set a different ID on each amplifier. Otherwise the display may flicker.

External amplifier information display can be changed by pressing TITLE while adjusting the input level.

If the GlideTouch bar is pressed and held while adjusting the input level, the amplifier link mode can be switched between lock and unlock.

If MENU is pressed while adjusting or setting items in the MENU mode, the unit will return to the previous selection screen.

By pressing the GlideTouch bar under RETURN in the MENU mode, the unit returns to the normal mode.

If no operation is performed for 60 seconds, the unit returns to normal mode.

26-EN

Image 27
Contents CDA-9855R DE CDA-9853R Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW About the GlideTouch Bar Operation Touch or press the desired position on the GlideTouch barMove your finger on the GlideTouch bar to the left or right Getting Started Listening to Radio Press TUNE/A.ME to select the tuning modeRadio Detaching and Attaching the Front PanelStation Title Search Function Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsReceiving RDS Regional Local Stations Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations Press FUNC. to activate the audio function modeReceiving Traffic Information While Playing CD or Radio PI Seek SettingPTY Programme Type Tuning Receiving Traffic InformationGlideTouch bar under P.PTY Priority PTY Programme TypeDisplaying Radio Text 12-EN13-EN Playback14-EN Repeat PlayX. Random Play Scanning ProgrammesAbout MP3/WMA Searching from CD TextFile/Folder Name Search concerning MP3/ WMA Quick Search16-EN Terminology17-EN Sound SettingEqualizer Presets Setting Users EQ modePress SOURCE/POWER to set the band width Q Adjusting and Storing the Parametric Equalizer CurveAdjusting and Storing the Graphic Equalizer Curve Adjust the level by turning the Rotary encoder19-EN Way modeRecalling the Stored Equalizer Curve About the CrossoverWAY System Adjusting and Storing the Crossover SettingsPress SOURCE/POWER to adjust the slope Adjust the output level by turning the Rotary encoderExample 2. Listening Position All Seats Recalling the Stored Crossover SettingsAbout Time Correction Example 1. Listening Position Front Left Seat22-EN Setting the Time Correction UnitAdjusting and Storing the Time Correction Display Setup menu is displayed23-EN Recalling the Stored Time Correction SettingsSetting the MX Mode About the MX indicator display CDA-9853R onlyPress Title Other FunctionsDisplaying the Title/Text 24-ENPress Title and select the Title Display Titling Discs/Stations25-EN About Title and TextIf a 4ch Amplifier is Connected Setting Amplifier LinkErasing Disc Title/Station Title If a Mono Amplifier is Connected27-EN Setting the Multicolour IlluminationChanging the Lighting Colour of All the Buttons If you want to use colours other than the aboveFile name of download data shall be AU*****.MP3 About i-PersonalizeData Downloading 28-EN29-EN General SettingPlaying MP3/WMA Data Play Mode Setup menu of the selected item is displayed30-EN Tuner SettingAudio Setting Display Setting31-EN Demo Setting Searching for a desired Song32-EN 33-EN Searching by PlaylistSearching by artist name Searching by album nameRandom Play Shuffle M.I.X Displaying the Text34-EN Multi-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional36-EN Remote ControlBasic Battery Replacement CDA-9855R onlyInformation Case of Difficulty38-EN AudioIndication for CD Player Indication for CD ChangerBottom side of player SpecificationsIndication for iPod Mode 39-EN40-EN Installation and ConnectionsInstallation 41-ENRemoval 42-EN Connections43-EN Amplifier Link / Vehicle Display Interface ConnectorTo prevent noise/interference in the audio system 44-ENCHM-S630 CHA-S634 CHA-1214 Alpine CD Changers Give You MoreAppendix Q9 no