Alpine CDA-9855R, CDA-9853R 43-EN, Amplifier Link / Vehicle Display Interface Connector

Page 44

1Amplifier Link / Vehicle Display Interface Connector

Outputs Amplifier Link / Vehicle Display Interface control signals.

Amplifier Link:Connect this to an external Amplifier Link compatible amplifier, using the (also separately sold) Amplifier Link box KCE-511M.

Vehicle Display Interface:Connect this to the optional Vehicle Display Interface box.

•Use the optional splitter cable to connect to both Amplifier Link box KCE-511M and Vehicle Display Interface box.

•For details about connections, consult your nearest ALPINE dealer.

2Antenna Receptacle

3Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received.

4Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

5Dimmer Lead (Orange)

This lead may be connected to the light switch of the vehicle. This will enable the switched on vehicle's light to dim the backlighting of the unit.

6Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

7Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

8Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

9Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

!ISO Power Supply Connector

"ISO Connector (Speaker Output)

#Left Rear (+) Speaker Output Lead (Green)

$Left Rear (–) Speaker Output Lead (Green/Black)

%Left Front (+) Speaker Output Lead (White)

&Left Front (–) Speaker Output Lead (White/Black)

(Right Front (–) Speaker Output Lead (Grey/Black)

)Right Front (+) Speaker Output Lead (Grey)

~Right Rear (–) Speaker Output Lead (Violet/Black)

+Right Rear (+) Speaker Output Lead (Violet)

,Ai-NET Connector

Connect this to the output or input connector of other product (CD changer, Equalizer, iPod adapter,*2 etc.) equipped with Ai-NET.

*2 If you connect to the iPod, you need the optional adapter (KCA-420i). For details on connection, refer to the Owner's Manual of the KCA-420i.

-Steering Remote Control Interface Connector

To steering remote control interface box.

.Fuse Holder (10A)

/Rear Output RCA Connectors

RED is right and WHITE is left.

:Front Output RCA Connectors

RED is right and WHITE is left.

;Subwoofer Output RCA Connectors

RED is right and WHITE is left.

<Setting the 3WAY/2WAY switch

Set the 3way/2way Switch according to your audio system.

=System Switch

When connecting a processor using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

•Be sure to turn the power off to the unit before changing the switch position.

>Power Supply Connector

?Ai-NET Cable (Included with CD Changer)

@RCA Extension Cable (Sold Separately)

[DC/DC Converter (CDA-9855R only).

•Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause a malfunction.

•Do not bundle the DC/DC converter cable with other audio cables. Doing so may induce noise into your system.

•Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast.

\ISO/JASO Antenna Adaptor (Sold Separately)

An ISO/JASO antenna adapter may be required, depending on the vehicle.

Continued

43-EN

Page 43 Page 45
Image 44
Page 43 Page 45
Contents CDA-9855R DE CDA-9853R Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Move your finger on the GlideTouch bar to the left or right About the GlideTouch Bar OperationTouch or press the desired position on the GlideTouch bar Getting Started Press TUNE/A.ME to select the tuning mode RadioDetaching and Attaching the Front Panel Listening to RadioManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations Station Title Search FunctionSetting RDS Reception Mode and Receiving RDS Stations Recalling Preset RDS StationsPress FUNC. to activate the audio function mode Receiving RDS Regional Local StationsPI Seek Setting PTY Programme Type TuningReceiving Traffic Information Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Displaying Radio Text12-EN GlideTouch bar under P.PTYPlayback 13-ENRepeat Play X. Random PlayScanning Programmes 14-ENSearching from CD Text File/Folder Name Search concerning MP3/ WMAQuick Search About MP3/WMATerminology 16-ENSound Setting Equalizer PresetsSetting Users EQ mode 17-ENAdjusting and Storing the Parametric Equalizer Curve Adjusting and Storing the Graphic Equalizer CurveAdjust the level by turning the Rotary encoder Press SOURCE/POWER to set the band width QWay mode Recalling the Stored Equalizer CurveAbout the Crossover 19-ENAdjusting and Storing the Crossover Settings Press SOURCE/POWER to adjust the slopeAdjust the output level by turning the Rotary encoder WAY SystemRecalling the Stored Crossover Settings About Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsSetting the Time Correction Unit Adjusting and Storing the Time CorrectionDisplay Setup menu is displayed 22-ENRecalling the Stored Time Correction Settings Setting the MX ModeAbout the MX indicator display CDA-9853R only 23-ENOther Functions Displaying the Title/Text24-EN Press TitleTitling Discs/Stations 25-ENAbout Title and Text Press Title and select the Title DisplaySetting Amplifier Link Erasing Disc Title/Station TitleIf a Mono Amplifier is Connected If a 4ch Amplifier is ConnectedSetting the Multicolour Illumination Changing the Lighting Colour of All the ButtonsIf you want to use colours other than the above 27-ENAbout i-Personalize Data Downloading28-EN File name of download data shall be AU*****.MP3General Setting Playing MP3/WMA Data Play ModeSetup menu of the selected item is displayed 29-ENTuner Setting 30-EN31-EN Audio SettingDisplay Setting 32-EN Demo SettingSearching for a desired Song Searching by Playlist Searching by artist nameSearching by album name 33-EN34-EN Random Play Shuffle M.I.XDisplaying the Text Changer Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control 36-ENBattery Replacement CDA-9855R only InformationCase of Difficulty BasicAudio Indication for CD PlayerIndication for CD Changer 38-ENSpecifications Indication for iPod Mode39-EN Bottom side of playerInstallation and Connections 40-ENRemoval Installation41-EN Connections 42-ENAmplifier Link / Vehicle Display Interface Connector 43-EN44-EN To prevent noise/interference in the audio systemAlpine CD Changers Give You More CHM-S630 CHA-S634 CHA-1214Appendix Q9 no
Top Page Image Contents