Alpine DHA-S690 Playing DVD/Video CD, Displaying a Programme List, If a menu screen appears

DVD/Video CD

Insert a disc with the label side facing up.

To load discs, see “Handling the Magazine” on page 7. Playback starts.

DISPLAY

FOLDER DN

ENT.

LIST

;

RETURN

g

-/J

L

REPEAT

CLR

AUDIO

MENU

TOP MENU

FOLDER UP

8

:

9

f

Numeric keypad (0 to 9)

ANGLE

SUBTITLE

•The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.

•It may take some time before playback starts after loading a disc.

•To return to the previous screen during Video CD playback, press RETURN. However, the function may vary depending on the disc.

•While “INDEX READ” is displayed by DivX®, the fast-forwarding/ fast-reversing and repeat functions, etc., cannot be used.

•While playing back a video CD with Playback Control (PBC), if the SELECT screen is displayed, you can play back by pressing and holding -/ J for at least 2 seconds.

If a menu screen appears

On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback.

•For many discs, the menu screen can also be displayed by pressing MENU.

DVD menu

Press 8, 9, ; or : to select the desired item, then press ENT.

Playing DVD/Video CD

Disc types that can be used for each heading are represented by the following marks.

DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVD-RW, DVD+R/DVD+RW recorded in a video mode can be used.

(including discs containing both DVD video and DVD audio data that are played back when “DVD-V” is set in “Setting the DVD Audio Playback Mode”

(page 20)).

DVD Commercial Audio discs can be used.

DVD-R/DVD-RW discs recorded in DVD-VR mode can be used.

Video-CD discs can be used.

CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW discs that are recorded in the DivX® mode can be used.

Caution

•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

•When using the remote control, be careful to press one button at a time. Pressing multiple buttons at the same time may cause erroneous operation.

•If you switch the power or ignition key OFF, or change sources during playback, playback will continue where you left off when you resume playback.

•If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the

monitor screen:

(When the red indicator is displayed, disc operation is prohibited.

When the white indicator is displayed, unit playback is prohibited.)

•For some discs it is possible to select items directly from the menu screen using the numeric keypad (“0” to “9”).

•If the DVD-Audio disc is set to “VIDEO ON”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” on page 20.)

Video CD menu

Use the numeric keypad (“0” to “9”) to select the desired number, then press ENT.

•Depending on the number of digits input, playback may start automatically even if ENT. is not pressed.

•The menu screen does not appear when the PBC function is turned off. In this case, set VCD PLAY MODE to turn on the PBC function. For details, refer to “Setting the Video CD Play Mode” (page 22).

Displaying a Programme List

1 Press TOP MENU while playing a DVD-VR disc.

The programme list screen is displayed.

2 Press or to select the desired programme, then press ENT.

The selected programme is played back.

•If PLAYLIST is selected, the playlist list screen is displayed.

•If a disc name or programme name exceeds the display range, the last character that appears in the display range is displayed as “~”(tilda accent).

10-EN