Alpine DHA-S690 owner manual Setting the Wallpaper, 24-EN, To watch the DVD on the rear monitor

Other Useful Features

ENT. 8

9

V.OUT

To watch the DVD on the rear monitor

5 See “Rear Monitor Select Function (AUX OUT)” in the AV head unit or front monitor’s owner’s manual to select the DVD image from this unit.

Caution

If the power or the ignition key is turned off without canceling the video output mode, the set will start up in the video output mode the next time the power is turned on, and the DHA-S690’s power will remain on even if the source is switched with the head unit/ AV head unit or if you try to turn off the power of the DHA-S690. If this happens, press and hold V.OUT for at least 2 seconds to cancel the video output mode.

•If the monitor has no rear monitor select function, the rear monitor cannot be connected.

•Buttons to operate, etc., vary depending on the product. Refer to the owner’s manual of the connected product for details.

To Output DVD Video While Listening to Another Source (CD/radio, etc.) (only when using Ai-NET)

When the DHA-S690 is connected to an Ai-NET compatible head unit or Ai-NET compatible AV head unit, DVD video can be output independently on the monitor.

If the rear monitor is connected, DVD video and audio can be output independently on the rear monitor.

For example, DVD video can be output on the front or rear monitor, while listening to the CD/radio from the head unit.

1 Change the source on the head unit or AV head unit to CD or radio, etc.

2 Select the DVD image from this unit with the V.SEL (VISUAL) (use the Simultaneous Function) on the AV head unit or front monitor.

3 Press V.OUT on the remote control for this unit. You can watch the DVD/video CD.

4 After using this function, press and hold V.OUT for at least 2 seconds to deactivate the video output mode.

Setting the Wallpaper

A data file downloaded from the ALPINE Owner’s website is written to a CD-R/CD-RW disc, and the disc is inserted into the DHA-S690, and then is saved in either “AREA 1” or “AREA 2”.

The wallpaper file can be saved and displayed as long as a disc is not inserted (in the magazine), or while playing a CD/MP3/WMA/AAC audio, or if a DVD disc is stopped.

•If several files are stored in a disc, only the first file will be stored on the unit.

1 Load a CD-R/CD-RW disc containing data in the magazine.

The UPDATE screen is displayed.

2 Press 8 or 9 to select an area (AREA 1 or AREA 2) you want to save, and then press ENT.

A wallpaper is saved in the selected AREA.

3 If you want to change the wallpaper, press and hold ENT. for at least 2 seconds while the unit is stopped.

•Up to 2 files can be stored on this unit. If the 3rd file is downloaded, the first file is overwritten and new one memorized.

•To change the wallpaper, press and hold ENT. for at least 2 seconds while no disc is inserted (in the magazine), or while STOP is set in disc mode.

•Even if the battery power cable is disconnected, the downloaded data is not cleared.

24-EN