Alpine DHA-S690 owner manual Indication, 34-EN

Page 36

Indication

DISC ERROR

Mechanism error.

1)Press c and eject the magazine (disc).

If the disc does not eject, press c again for at least 3 seconds and eject the magazine (disc).

If the disc still does not eject, consult your Alpine dealer.

2)When the error indication remains after ejecting, press c again.

If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.

The temperature in the car is too low.

- Raise the temperature in the car to normal temperature.

NO DISC

No disc is inserted. - Insert a disc.

Remote control operation is not possible.

-For some discs or playing modes, certain operations are not possible. This is not a malfunction.

(When the red indicator is displayed, disc operation is prohibited.

When the white indicator is displayed, unit playback is prohibited.)

LOADING ERROR

EJECT ERROR

Mechanism error.

1)Press c and eject the magazine (disc).

If the disc does not eject, turn the power off once and then on again, then press c for at least 3 seconds and eject the magazine (disc).

If the disc still does not eject, consult your Alpine dealer.

2)When the error indication remains after ejecting, press c again.

If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.

VIDEO SIGNAL

SYSTEM IS NOT

CORRECT

Displays if a disc differs from the setting on the device. - Sets in “Setting the TV System” (page 21).

REGIONAL CODE

VIOLATION

Disc does not match regional code number.

- Load a disc that matches the regional code number.

HI-TEMP

Protective circuit is activated at high temperature.

-The indicator will disappear when the temperature returns to within operation range.

-Leave the power OFF until the temperature decreases and then turn the power ON again.

34-EN

Image 36
Contents DHA-S690 Page Contents Installation and Connections Operating Instructions Precautions Mark logo Disc sizeDivX Two-layer DVD disc compatibleTips for making your own CDs When Using the Remote Control Battery ReplacementHandling the Magazine Loading discsRemoving discs Turning Power On and Off Switching between Ntsc and PALSelecting the Disc Displaying a Disc ListPlaying DVD/Video CD Displaying a Programme ListIf a menu screen appears 10-ENDisplaying a Playlist Stopping Playback PRE-STOPStopping Playback Fast-forwarding/Fast-reversingPlaying Still Frames pausing Displaying a Folder/File Menu ListSelecting Folders Slow Motion PlaybackSearching by Title/Group/Folder Number Repeat Playback13-EN Switching the Audio Tracks Switching the AngleDVD-VR/Video CDs with multiplex audio 14-ENSwitching the Subtitles subtitle language Displaying the Disc Status15-EN Selecting Folders MP3/WMA/AAC X. Random PlayPlayback Repeat PlaySearching Directly by File Number MP3/WMA/AAC Recalling a Track/Folder/File NumberAbout MP3/WMA/AAC 17-ENTerminology 18-ENSetup Operation 19-EN20-EN 21-EN 22-EN Setting the Downmix Mode 23-ENAudio output/Optical digital audio output 48 kHzSetting the Wallpaper 24-ENTo watch the DVD on the rear monitor Load a CD-R/CD-RW disc containing data in the magazinePress Source to select the DVD changer or CD changer mode Operating from the Head Unit25-EN Functions operable from the head unitControls on Remote Control 26-ENAbout DVDs 27-ENAbout DivX About JpegAbout WAV About ASFTerminology List of Language Codes 30-ENFor details, see List of Country Codes 31-EN32-EN Case of Difficulty 33-ENIndication 34-ENSpecifications 35-ENRear side of player Installation and Connections 36-ENConnecting Mounting the Remote Control Sensor UnitPreparation 37-ENInstallation 38-ENChecking Operation 39-ENFasten the L-shaped brackets 2 to both sides of this unit Connections 40-ENSetting the System Switch System Example41-EN 42-EN Display43-EN Changer