Alpine DHA-S690 owner manual 43-EN, Changer

•Connecting an Ai-NET compatible AV head unit / Digital Audio Processor

Change the system switch on the AV

head unit to “EQ/DIV”.

		AV Head Unit
	IVA-D105R, etc. (sold separately)			Ai-NET Connector
						Ai-NET Input
					Ai-NET Cable	Connector
AUX Video
Input Terminal
			Remote Control
			Output Lead		Fiber Optic Cable
			(white/brown)			Digital Input
					(sold separately)
						Terminal (Optical)
						(Changer)

Digital Audio Processor

PXA-H701, etc. (sold separately)

Ai-NET Input

Connector

(CHANGER IN)

RCA Extension Cable (included)

Remote Control	Digital Output	Ai-NET Cable (included)
Input Lead
	Terminal
(white/brown)
	(Optical)
		Ai-NET Connector

		Setting of DHA-S690
Video Output		The DHA-S690’s system settings must be
		made after connections are completed.
Connector
		Before fixing the unit in place, refer to
		page 41 to change the system setting.
	DHA-S690	System Switch

1 2

Switches to “1”.

•Be sure to switch the head unit’s system switch before turning the power on.

•Be sure to make the setting (DVD CHG or CD CHG) in “Setting the Connected Head Unit” (page 21) according to the connected Ai-NET compatible head unit.

•If CD CHG is set in “Setting the Connected Head Unit” (page 21):

If you want to play back a DVD Audio, set “Switching the input (non Ai-NET connections)” on the connected Alpine audio processor (PXA-H700, PXA-H701) to “Analog.” For details on operation, refer to the Owner’s Manual of the audio processor.

•The switched Power Lead (Ignition) connection is not needed.

•Also refer to the operating instructions of the other products in the system.

•When connecting the optical digital output to a digital audio processor, be sure to make connection to the CHANGER connectors of the digital audio processor optical digital input connectors. This arrangement allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects even when connection is made to the CHANGER connectors.

Observe the following when using Fiber Optic Cable.

•Be careful not to bend the fiber optic cable at a sharp angle.

•Do not coil the fiber optic cable smaller than a 30 mm radius.

•Do not place anything on top of the fiber optic cable.

43-EN