Switching the Audio Tracks
↓
REPEAT CHAPTER
↓
REPEAT PROGRAM
↓
REPEAT DISC
↓
REPEAT OFF
The chapter is played repeatedly.
The programme is played repeatedly.
The entire disc is played repeatedly.
Playback does not repeat. (Factory default)
For discs with multiple audio or audio languages, you can switch the audio language temporarily during playback.
During playback, press AUDIO.
The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.
• The selected audio track becomes the default setting every time the |
power is turned on or the disc is replaced. Depending on the disc, |
↓
REPEAT CHAPTER
↓
REPEAT PLAYLIST
↓
REPEAT DISC
↓
REPEAT OFF
VIDEO CD
↓
REPEAT TRACK
↓
REPEAT DISC
↓
REPEAT OFF
DivX ®
The chapter is played repeatedly.
The playlist is played repeatedly.
The entire disc is played repeatedly.
Playback does not repeat. (Factory default)
The track is played repeatedly.
The entire disc is played repeatedly.
Playback does not repeat. (Factory default)
| the unit plays back the disc’s specified language. |
• | Not all discs will allow changing the alternate audio tracks during |
| playback. In these cases, select audio tracks from the DVD’s menu. |
• | There may be a delay before the selected alternate track begins to play. |
DVD-VR/Video CDs with multiplex audio
DVD-VR
During playback, press and hold AUDIO for at least 2 seconds.
The left and right channels will be output as shown below, each time the button is pressed.
LR → LL → RR → LR
Video CD
During playback, press AUDIO.
The left and right channels will be output as shown below, each time the button is pressed.
LR → LL → RR → LR
Display example when “ALL” is set in “Setting Compression
Switching the Angle 
Playback Data” (page 22).
↓
REPEAT FILE
↓
REPEAT FOLDER
↓
REPEAT DISC
↓
REPEAT OFF
The file is played repeatedly.
The folder played repeatedly.
The entire disc is played repeatedly.
The mode returns to normal playback. (Factory default)
On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc each time the button is pressed.
• Some time may be required for the angle to change. |
• Depending on the disc, the angle may switch in one of two ways. |
- Seamless: The angle switches smoothly. |
- |
displayed first, after which the angle switches. |
• If the |
performed. (Refer to “Setting the DVD Audio Playback Mode” on |
•The track/disc repeat modes cannot be used on video CDs with playback control (PBC). Set VCD PLAY MODE to turn the PBC function off. Refer to “Setting the Video CD Play Mode” (page 22).
•Depending on the
•During playback, pressing and holding REPEAT for at least 2 seconds will change the unit to REPEAT OFF.
page 20.) |