![](/images/new-backgrounds/1221545/221545111x1.webp)
Connect the
Navigation system (Sold Separately)
Guide Control lead*
(White/Green)
Guide Control lead
(White/Green)
Fiber digital Input terminal (for DVD Player)
RCA extension cable
Fiber optic cable
Audio Processor
| (Yellow) | ||
(White/Brown) | (White/Brown) | DVD Video Player | |
|
| ||
REMOTE OUT | REMOTE IN | ||
(Sold Separately) | |||
| |||
|
|
|
|
| |
CD Changer | |||
| |||
| (Sold Separately) | ||
|
|
|
*Guide Control lead is not connected when
•When the
RGB Cable (Included with
Factory System Input Terminal
Navigation Input (RGB Input) Terminal
Connect this to the RGB output terminal of the Navigation System.
System Switch
When connecting an equalizer or divider using
•Be sure to turn the power off on the unit before changing the switch position.
Guide Control Lead (White/Green)
Ai-NET Connector
Connect this to the output or input connector of other products equipped with
Guide Output Terminal
If an external audio processor is connected, outputs the navigation interrupt voice signal that is input from the Alpine navigation system, or the speaker input terminal.
RCA Extension Cable (Sold Separately)
Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
To Ai-NET Connector (Grey)
To
AUX Video Input (AUX1) Terminal
Connect the video output lead of a DVD video player or DVD changer to this terminal.