2 Press the joystick up or down to select GENERAL SETUP, then press the joystick right.
The GENERAL SETUP screen is displayed.
Display Example for GENERAL SETUP Screen
3 Press the joystick up or down to select the desired item.
Setting items:
DEMO / CLOCK TYPE / CLOCK ADJ / DAYLIGHT TIME / BEEP / REACTOR / SCROLL AUTO / RDS CLK DISP / FM LEVEL /
PI SEEK / RDS REGIONAL / PTY LANGUAGE / LANGUAGE SEL
4 Press the joystick left or right to adjust and set the desired item.
5 Press TA/RTN/SETUP to return to the previous screen. Press TA/RTN/SETUP repeatedly to return to the main source screen displayed before starting the setup operation.
•Select SETUP on the FUNCTION screen to recall the SETUP screen after pressing and holding 
/MENU/FUNC. for at least 2 seconds.
•Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed.
Demonstration Function
This unit is equipped with a demonstration function capable of showing basic operations of respective sources on the monitor display.
Setting item: DEMO
Setting content: OFF / ON
ON: Turns on the demonstration mode to show the basic operations.
OFF: Turns off the demonstration mode.
•The demonstration operation is automatically repeated until the function is turned off.
Setting the Time Display
The time display type can be set.
Setting item: CLOCK TYPE
Setting content: OFF / 12H / 24H
12H: Clock indication is displayed for 12 hours.
24H: Clock indication is displayed for 24 hours.
OFF: Clock indication is turned off.
Setting the Time
Setting item: CLOCK ADJ
Further setting items: HOUR / MINUTE
Setting content:
HOUR: Adjust the hour.
MINUTE: Adjust the minute.
*The setting content differs depending on the selection in "Setting the Time Display" (page 14).
•Pressing and holding the joystick left or right will change the setting item continuously.
Setting Daylight Saving Time
Setting item: DAYLIGHT TIME
Setting content: OFF / ON
ON: Place the Summer Time mode ON. The time advances by one hour.
OFF: Return to the ordinary time.
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the commander is pressed.
Turning the Commander Vibration ON or
OFF
You can turn the commander vibration ON or OFF during operation.
Setting item: REACTOR
Setting content: OFF / ON
OFF: Turns off vibration during operation.
ON: Turns on vibration during operation.
Setting the Scroll
Scroll display is available if CD text, folder name, file name or tag information is entered.
Setting item: SCROLL AUTO
Setting content: OFF / ON
ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed.
•Scroll display of the song, artist and album name is enabled when iPod is connected.