Audiovox UCD300 CD Changer Controls, CD Changer Mode Selector Mode, 21 , 22 Disc Select 5CD-/6CD+

UCD300/UMP400

CD CHANGER CONTROLS

Built into the UCD300 and UCD400 are controls to operate an optional CD changer. Please check with your Phase Linear/Audiovox car stereo specialist or call 1-800-323-4815 for recommendations of the models that will work with this radio.

Adjustment of the audio functions (volume, tone, balance, and fader) and CD functions (Pause/Play, SCN, SHF, RPT and TRACK selection) for the CD changer operate in the same manner as they do for radio play. See the Operation and CD Player Operation sections for information about these topics.

14CD Changer Mode Selector (MODE)

Press the MODE button (14) to select operation of the CD changer, as shown by “CDC” on the display panel. Disc play will begin and the disc and track number will be shown on the display panel. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc in the magazine. If a magazine was already in the changer, play will resume from the track on the disc previously in play.

21 , 22 Disc Select (5CD-/6CD+)

These CD-/+buttons (21 and 22) are used to select the desired disc for play. To advance to a lower number disc, press the 5 CD- button (21). To return to a higher number disc, press the 6 CD+ button (22). The number of the disc in play will be shown on the display panel.

The following controls will operate an optional CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.

RELEASE										EJECT
/
	UCD300									MON
PWR
								DSP
EQ							>	TUNE	>	LOC
								TRACK
								BAND
SEL			AM / FM / CD RECEIVER							MUT
AS/PS	1 PAU	2 SCN	3 RPT	4 SHF	5 CD-	6 CD+	MODE	LOUD
					21	22	14
14