Alpine IVA-D300 owner manual Listening to the Radio, 13-EN

2

Touch [ ] to activate the search mode. The screen changes to the radio title list display.

1

2

1

5

1

Touch [:] to select the desired radio title.

The screen changes to the radio mode main display, and the desired radio station is received.

The preset station is received.

Searching from Radio Station Title

If the title of a radio station is entered, a title list is displayed. (See “Titling Discs/Radio Stations” on page 22)

Touch any one of the preset buttons [P.SET 1] through [P.SET 6] that has a station stored to it.

After selecting the desired band, touch [P1/2] to change the function guide.

To use this procedure for other bands, simply select the band desired and repeat the procedure.

A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 or AM).

• If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized.

Automatic Memory of Station Presets

The tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength.

After selecting the desired band, touch [A.MEMO]. The tuner automatically seeks and stores 6 strong stations into [P.SET 1] to [P.SET 6] in order of signal strength.

When the automatic storing has been completed, the tuner goes to the station stored in [P.SET 1].

• If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began.

Tuning to Preset Stations

You can tune in the preset stations in memory on each band using the preset number.

Repeat the procedure to store up to 5 other stations onto the same band.

2 Touch [P1/2] to change the function guide.

3 Touch [MEMORY].

4 Touch any one of the preset buttons [P.SET 1] through [P.SET 6] within 5 seconds.

The selected station is stored.

Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning.

Manual Storing of Station Presets

Radio

Display example for Radio main screen

1 A 3 4 5

2 B

6

1[SRC] button: Refer to page 11

2[TITLE] button: Refer to page 22

3 [ ] button: Refer to pages 55 to 57

4[V.SEL] button: Displays the VISUAL selection screen

5[SYS.] button: Displays the SYSTEM selection screen

6 [ ] button: Refer to page 11

ADisplays the input radio station title.

BDisplays the preset number/frequency.

Listening to the Radio

1

2

Touch [SRC] on the main source screen.

The source selection screen is displayed.

Touch [RADIO].

The radio mode is activated and the display changes to the Radio Mode screen.

3 Touch [BAND] to select the desired radio band.

Each press changes the bands as follows:

FM-1 → FM-2 → AM → FM-1

4 Touch [TUNE] to choose the tuning mode.

Each touch changes the tuning mode display.

Distance → Local

gf g f

→ Manual →

()

Distance

g f

•There are two modes you can select for auto tuning, DX and Local:

-DX (Distance) mode (with DX SEEK indicator ON); Both strong and weak stations will be tuned in.

-Local mode (with SEEK indicator ON); Only strong stations will be tuned in.

The initial setting is DX.

5 Touch [g] or [f] to change the radio frequency up or down respectively.

When the button is touched and held, the frequency changes continuously until the button is released.

•When a stereo FM station is tuned in, the STEREO indicator appears in the display.

13-EN