Alpine IVA-D300 MobileHub Link Optional, Displaying the Category/Channel Name Title List, 55-EN

Displaying the Category/Channel Name Title List

1 In XM mode, touch [].

The category title list is displayed.

Screen example for category search list

2

1

3

4

1Turns the page

2Touch [:] to receive the selected category channel directly.

3[] is displayed if there is a hierarchical list. Touch [] to change the channel name search screen of the selected category.

4Category UP/DOWN can directly be performed.

Screen example for channel name search list

2 3

1

4

1Turns the page

2Returns to the category search list.

3The selected channel is received.

4Category UP/DOWN can directly be performed.

2 Touch [:] of the selected Category or Channel name.

The channel in the selected category is tuned.

Selecting the Channel directly

You can directly select the channel number on the display of the numeric keypad.

1 Touch [P1/3] twice in the XM mode.

The function guide appears.

2 Touch [10KEY].

The numeric keypad input screen is displayed.

3 Touch to input the channel number.

4 Touch [ENT].

The selected channel is received.

MobileHub™ Link

(Optional)

About MobileHub™ Link (Optional)

Connect a separately sold junction box and a portable telephone (available from Nokia) to control the incoming and outgoing calls of the portable telephone.

CAUTION

•Even with hands-free operation, a driver can be distracted during telephone operation or receiving a call. For the sake of safety, drivers are requested to refrain from operating the telephone while driving.

•For the sake of safety, operations other than incoming calls and Speed-Dial outgoing calls cannot be used.

•If a portable telephone is connected, its address book, incoming and outgoing history, short message history and standardized sentences are downloaded to the junction box.

Please refer to the instruction manual of the junction box.

•When a portable telephone is not connected, “NO PHONE” is displayed for at least 5 seconds, then the mode returns to the original source mode.

•When the portable telephone is taken off the junction box during an incoming or outgoing call, or during a hands-free call, the call will be treated as an ordinary one by the portable telephone.

•When there is an incoming call while the power of the IVA-D300 is OFF, the power of the IVA-D300 turns ON automatically, hands- free call is cut, and the portable telephone call is enabled.

•Even if the power of the portable telephone is OFF, when IVA- D300 is set to the telephone mode, the power of the portable telephone will be turned ON.

•If the ACC power of the vehicle is turned OFF (the engine is stopped) during a hands-free call, the hands-free call cuts, and the portable telephone call is enabled.

•If there is an incoming call during operation (except an outgoing call or talking), operation mode will end and switch to the incoming or talking mode.

•An outgoing call from a portable telephone is also possible. However, you cannot perform different operations at the same time from a portable telephone and IVA-D300 as malfunction can result.

•With a junction box connected outgoing, incoming, and sending history will also be recorded in the portable telephone.

•While telephoning, Time Correction is set to normal (0.0ms) and DEFEAT is also set to ON. When the call has finished, the unit returns to the setting which you previously set.

•The telephone volume can be adjusted from the IVA-D300. The volume you set during the call is memorized, and is automatically applied again on the next call.

55-EN