Alpine IVA-D300 Setting the Speakers, Set MX Mode of the External Audio Processor, 44-EN

Adjustment Procedure for Dolby Surround

Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.

Adjustment procedure

1	Speaker Setup (page 48)
	(Turning the speakers to be used on and off and
	setting their response)
	B
2	Adjusting the speaker levels (page 49)
	(Adjusting the signal output level to the various

speakers)

B

3	Mixing bass sound to the rear channel (page
	48)
	(Achieving smooth sound in the rear seat by mixing
	the front audio signals with the rear speaker signals)
	B
4	Adjusting the acoustic image (page 48)
	(Adjusting the acoustic image to achieve a sound as
	if the center speaker were directly in front of the
	listener)
	B
5	Achieving powerful high volume sound (page
	49)
	(Achieving energetic sound with even greater power,
	like the sound in a movie theater)
	B
6	Adjusting the DVD Level (page 49)
	(Adjust the volume (signal level) in the Dolby Digital,
	Pro Logic II, DTS and PCM modes.)
	B
7	Storing Settings in the Memory (page 49)
	(Storing all the settings and adjustments made on the

IVA-D300 (not only the above settings/adjusts) in the memory)

In case of combining the Automatic adjustments etc.

We recommend to make the Automatic adjustments before the Dolby Surround adjustments.

Setting the Speakers

1 Check that Defeat mode is off (page 22). 2 Touch [SYS.] on the main source screen.

The SYSTEM selection screen is displayed.

3 Touch [i-Personalize].

The i-Personalize screen appears.

4 Touch [] of A.PROCESSOR.

The A.PROC list screen appears.

5 Touch [] of SPEAKER SELECT.

The SPEAKER SELECT screen appears.

6 Set the connected speaker by touching the respective [;] or [:] button.

FRONT1: OFF/FULL (Full Range)/TW (Tweeter)

FRONT2: OFF/ON

REAR: OFF/ON

CENTER: OFF/ON

SUBWOOFER: OFF/MONO/STEREO

7 Touch [RETURN] to return to the previous screen.

•Set the speaker which is not connected to OFF.

•Settings above can be carried out even when the speaker is set to OFF in “Speaker Setup” (page 48).

•To use the subwoofer in MONO with PXA-H700 or PXA-H701 connected, connect the subwoofer to the subwoofer output terminal of PXA-H700 or PXA-H701.

Set MX Mode of the External Audio Processor

Before performing the operations below, set MX (Media Xpander) mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.

1 Check that Defeat mode is off.

2 Touch [SYS.] on the main source screen.

The SYSTEM selection screen appears.

3 Touch [i-Personalize].

The i-Personalize screen will appear.

4 Select ON or OFF of MX by touching [;] or [:] of

MEDIA XPANDER.

OFF: Turns off the MX effect of every music source.

ON: Turns on the specified MX mode.

5 Touch [] after setting to ON.

The Media Xpander setup screen appears.

44-EN