Alpine IVA-D300 Other Useful Features, Adjusting the Audio, Titling Discs/Radio Stations, 22-EN

Other Useful Features

Adjusting the Audio

Press the Rotary encoder on the unit.

The display changes to the Audio Adjustment screen.

Display Example for Audio Adjustment Screen

3

2

1

4

1Adjust the volume of the front and rear speakers by touching [F] or [R].

2Adjust the volume of the left and right speakers by touching [L] or [R].

3Determine your desired setting value by touching and moving [O].

4Touches [;], [:] to adjust to your preference.

•Touch [AUDIO MODE] on the SYSTEM selection screen to change to the Audio Adjustment screen.

Adjusting the Balance

Touch [L] or [R] to adjust the sound volume of the left and right speakers.

Setting range: L15 to R15

Adjusting the Fader

Touch [F] or [R] to adjust the volume of the front and rear speakers.

Setting range: F15 to R15

Adjusting the Subwoofer Level

Touch [;] or [:] of SUBW. to adjust the subwoofer output.

Setting range: 0 to 15

•The level adjustment becomes available when 0° or 180° is set in “Subwoofer On and Off” (page 40).

Adjusting NAV. LEVEL

Touch [;] or [:] of NAV. to adjust the volume of navigation interruption.

Setting range: 0 to 15

•This adjustment becomes available when NAV.MIX is turned on in “Setting the Navigation Interruption” (page 32).

Turning defeat ON or OFF

Touch [;] or [:] of DEFEAT to turn it ON or OFF.

If you set the defeat to ON, MX is turned OFF and EQ is returned to the initial setting.

Adjusting the BASS Level

Touch [;] or [:] of BASS to adjust the low frequency bass level.

Setting range: 0 to 11

•This adjustment becomes available when AMP Link compatible external amplifiers (MRD-M301 and MRD-M501) are connected.

Adjusting the Balance/Fader Directly

Touch and move [\] to a desired setting.

Or touch a desired setting range, and [\] will move to that location.

Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.

Titling Discs/Radio Stations

To display the Title Inputting screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the Title Inputting mode operation has been released. Engaging the parking brake can reactivate the Title Inputting mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the Title Inputting mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the Title Inputting mode screen.”

•Trying to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING.

You can title radio stations and Discs (CD, Video CD). This manual describes how to title radio stations.

(You cannot title DVD and MP3/WMA discs.)

1 Activate the Radio mode.

2 Touch [TITLE] on the radio main screen.

The title input screen appears.

3 Touch a desired character symbol to input. Up to 16 digits can be input.

Each time [A/a/1/+] is touched, alphabet upper case, lower case, numerical and then symbols are selected.

22-EN