Alpine IVA-D300 owner manual Telephone Reception, Calling

Page 58

Telephone Reception

1 When this unit receives a call, the screen is switched to RINGING display of Telephone mode.

2 When AUTO call (setting of AUTO/MANUAL call page 31) is selected, CONNECT display appears and this unit enters AUTO call mode in 3 seconds after receiving.

3 To cut the call, touch [] . Or the call is automatically cut in 5 seconds after finishing.

The screen returns to the previous source mode.

To input any number or symbol during call:

1Touch [10KEY] in the CONNECT display. The numeric keypad screen is displayed.

2Touch and input a desired number or symbol.

3Touch [RTN] to return to the previous screen.

4Touch [] to start a call.

Calling

Calling by using the Speed Dial

You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.

1 Touch [

 

] on the main source screen.

 

 

 

The Speed Dial and the numeric keypad displays appear.

2 Touch any one of the buttons [1] through [9] in which the telephone numbers are recorded.

•A call is sent directly by touching and holding any one of the recorded buttons [1] to [9] for at least 2 seconds.

3

Touch [

] to start call.

 

4

To cut the call, touch [

]. Or the call is

automatically cut in 5 seconds after finishing.

•If no telephone number is registered in the selected function button, "NO PRESET" is displayed for 5 seconds.

Touch [RETURN] to return to the Telephone menu.

•When [SPEED DIAL] is touched in the Telephone menu display, the Speed Dial display appears.

Dial call

Input the telephone number using the dial.

1 Touch [

 

 

 

 

 

] on the main source screen.

 

 

 

 

 

 

 

 

 

 

 

 

The Speed Dial display appears.

2 Touch [RTN] on the numeric keypad input screen to close the numeric keypad screen.

The Telephone menu display appears.

3 Touch [DIRECT CALL].

The Direct Call and numeric keypad displays appear.

4

Touch and input the telephone number.

5

Touch [ENT].

6

Touch [

] to start call.

•The call is cut in 5 seconds after “NO NETWORK COVERAGE” is displayed.

To listen to the answer-phone or to input numbers:

1In the CONNECT display, touch [10KEY].

The Dial Sending and numeric keypad displays appear.

2Touch and input a desired number or symbol.

3Touch [RTN] to return to the previous screen.

7 To cut the call, touch [ ]. Or the call is automatically cut in 5 seconds after finishing.

The screen returns to the previous source mode.

•If [RETURN] is touched within 5 seconds of cutting the call, the Telephone menu display appears.

•When the call is cut, touching [ ] dials the number again.

Calling by the address book

From your vehicle, call from the address book registered in the portable telephone.

The operation may be carried out only when vehicle is parked.

1

Touch [

 

] on the main source screen.

 

 

 

 

The Speed Dial display appears.

2

Touch [RTN] on the numeric keypad input screen

 

to close the numeric keypad screen.

The Telephone menu display appears.

3 Touch [PHONE BOOK].

The Phone Book list appears.

4 Touch [CALL] of a desired addressee on the list.

• By touching [ ] or [ ], the names are listed in alphabetical order.

•If no data is in the PHONE BOOK, "NO MEMORY" is displayed. Touch [RETURN] to return to the Telephone menu display.

5

Touch [

] to place the call.

6

To cut the call, touch [

]. Or the call is

automatically cut in 5 seconds after finishing.

Calling by the outgoing / incoming /

absent incoming history

You can place a call to one of the last 999 calls by the outgoing/ incoming/absent incoming history.

1 Touch [

 

 

 

 

 

] on the main source screen.

 

 

 

 

 

 

 

 

 

 

 

 

The Speed Dial display appears.

2 Touch [RTN] on the numeric keypad input screen to close the numeric keypad screen.

The Telephone menu display appears.

3 Touch any one of the buttons [DIALED CALL], [MISSED CALL] or [RECEIVED CALL].

DIALED CALL:

Outgoing history list display

MISSED CALL:

Absent incoming history list display

RECEIVED CALL:

Incoming history list display

•If no history is registered to any of the lists, “NO MEMORY” is displayed.

To return to Telephone menu display, touch [RETURN].

56-EN

Page 57 Page 59
Image 58
Page 57 Page 59
Contents IVA-D300 CHA-S634 CHA-1214CHM-S630Contents Monitor Setting Installation and Connections Operating Instructions Precautions Discs playable on this unit ALL Disc terminology Location of Controls Using Face CoverGetting Started Initial System Start-UpLowering Volume Quickly Turning Power On or OffAdjusting the Volume How to view the DisplayTouch SRC on the main screen Recalling the Source11-EN Source selection screen is displayedDual-Screen Display Displaying the Numeric Keypad Input Screen12-EN Listening to the Radio Radio13-EN Playback 14-ENAbout MP3/WMA Repeat PlayX. Random Play 15-ENTerminology 16-ENPlaying DVD/Video CD To display the DVD mode screenDVD/Video CD 17-ENDirect Menu Operations DVD only If a menu screen appears18-EN Menu Operations DVD onlyStopping Playback Turning the PBC Function on or OFF Video CD onlyStopping Playback PRE Stop Fast-forwarding/Fast-reversingSlow Motion Playback Playing Still Frames PausingFrame-by-frame Playback Chapter/Track/Title Repeat PlaybackSwitching the Subtitles Subtitle Language DVD only Switching the Angle DVD onlySwitching the Audio Tracks Switching from the disc menuTitling Discs/Radio Stations Other Useful FeaturesAdjusting the Audio 22-ENRear Entertainment Function Disc Search Function23-EN 24-EN Switching Display ModesSwitching the function of the remote sensor Touch FRONT, Rear 1 or RearSetting the Visual Effect Blackout Mode On and OffSetting Visualizer Canceling the Simultaneous FunctionMonitor Setting Operation Monitor Setting26-EN DVD Setup Operation SetupDVD Setup 27-EN28-EN 29-EN Audio output/Optical digital audio outputGeneral Setup Operation General Setup30-EN 31-EN System Setup Operation System Setup32-EN 33-EN Display Setup Operation Display Setup34-EN Media Xpander Function Setting the MX modePersonalizeTM 35-ENAdjusting and Storing/Recalling the Parametric EQ Setting the Bass EngineSelecting Bass EQ mode Makers setting Bass Engine FunctionAbout the Time Correction Storing Adjusted ContentsRecalling the Adjusted and Stored Contents 37-EN38-EN Adjusting and Storing/Recalling the Bass FocusSetting item Bass Focus Setting contents Example 2. Listening Position All SeatsAdjustment and Storing/Recalling of Time Correction 39-ENSubwoofer On and Off Visual EQ Setting Operation40-EN Data Download About Sound Setup Download41-EN Data Downloading Setting AMP Link Optional42-EN Titling the Amplifier External Audio Processor OptionalDisplaying Status of External Amplifier 43-ENSet MX Mode of the External Audio Processor Setting the Speakers44-EN Performing Time Correction Manually TCR Over Adjustment45-EN Graphic Equalizer Adjustments Phase Switching46-EN Setting Bass Compressor Parametric Equalizer AdjustmentsSetting Bass Sound Control Setting Bass FocusAdjusting the acoustic image Speaker SetupSetting of Dolby 5.1ch Mixing bass sound to the rear channelGetting out the Preset Memory Adjusting the DVD LevelStoring Settings in the Memory Achieving powerful high volume soundLinear PCM Setting Using the Pro Logic II Mode50-EN Touch NAV Operating Auxiliary Devices Optional51-EN Touch AUXMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional 52-ENListening to Music of HDD HDD Player Operation OptionalXM Radio Optional Receiving XM Channels with the XM Receiver OptionalChanging the Display Tuning in to Categorized ProgramsStoring XM Channel Presets Checking the XM Radio ID NumberSelecting the Channel directly MobileHub Link OptionalDisplaying the Category/Channel Name Title List About MobileHub Link OptionalTelephone Reception CallingAbout DVDs SMS Short Message Service OperationInformation Receiving a Short messageDolby Pro Logic TerminologyDolby Digital Linear PCM audio Lpcm59-EN List of Language CodesFor details, see List of Country Codes 60-EN61-EN Radio Case of DifficultyBasic CD/MP3/WMA/DVD/Video CDIndication for DVD/Video CD Indication for CD/MP3/WMA63-EN Indication for CD changer Indication for XM radio mode64-EN Specifications 65-ENInstallation and Connections 66-ENInstalling the Monitor Installation67-EN When mounting with Velcro fasteners Installing the Tuner BoxInstalling the DC/DC Converter 68-ENParking Brake Lead Connection Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available Foot Brake Lead / Parking Brake Lead ConnectionConnections IVA-D300 Wiring Diagram 70-EN71-EN System Example 72-EN73-EN Digital Output Terminal Ai-NET ConnectorTo Ai-NET Connector Gray To Ai-NET Connector Black AUX Video Input AUX1 Terminal74-EN When Connecting External EquipmentUse when connecting a back-up camera Remote IN/OUT Terminal Camera Input Terminal75-EN IVA-D300 Tuner BOXLimited Warranty ALPINE-1

IVA-D300 specifications

The Alpine IVA-D300 is a sophisticated in-car audio and video system that epitomizes cutting-edge technology in the realm of automotive entertainment. Designed to elevate the in-car experience, the IVA-D300 combines reliable performance with a sleek interface, making it a popular choice among car enthusiasts and casual users alike.

One of the standout features of the IVA-D300 is its 7-inch motorized touchscreen display. This high-resolution screen ensures clear visuals, whether you're watching movies or navigating through your music library. The touchscreen interface is intuitive, allowing users to easily access their favorite media and settings.

The IVA-D300 supports a wide range of audio and video formats, ensuring compatibility with a variety of devices. With options for DVD playback, CD playback, and even MP3/WMA file support, this unit accommodates nearly all your entertainment needs. Furthermore, it boasts the capability to connect to external devices through USB and auxiliary inputs. This feature allows users to effortlessly link their smartphones or portable music players, enhancing the versatility of the system.

In terms of audio performance, the IVA-D300 offers a powerful 4-channel amplifier with adjustable sound settings. Users can fine-tune their audio experience with a built-in equalizer and various sound enhancement technologies. The inclusion of a built-in crossover also allows for optimal speaker performance by directing specific frequencies to the appropriate speakers.

A noteworthy technological advancement in the IVA-D300 is its support for Bluetooth connectivity. This feature not only enables hands-free calling but also allows for wireless audio streaming from smartphones and other compatible devices. The integration of Bluetooth technology emphasizes convenience and enhances safety, as drivers can focus on the road while staying connected.

Moreover, the IVA-D300 is designed with expanding capabilities in mind. The system can be integrated with various accessories such as satellite radio and rearview cameras, providing users with a more comprehensive multimedia experience.

In summary, the Alpine IVA-D300 is a feature-rich in-car entertainment system that stands out for its advanced technologies and user-friendly design. Its high-quality display, extensive media compatibility, powerful audio features, and Bluetooth connectivity make it an excellent choice for anyone looking to enhance their in-car experience. With the IVA-D300, drivers can enjoy both the journey and their favorite entertainment seamlessly.
Top Page Image Contents