Alpine IVA-D300 owner manual DVD Setup Operation, 27-EN

Setup

DVD Setup

DVD Setup Operation

To display the DVD mode screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”

The DVD Setup operation can be carried out after removing the disc from the unit.

The following steps 1 to 5 are common operations to each “Setting item” of DVD Setup. Refer to each section for details.

1 Touch [SYS.] on the main source screen.

The SYSTEM selection screen is displayed.

2 Touch [SETUP].

The SETUP screen appears.

3 Touch [] of DVD SETUP.

The DVD setup screen appears.

4 Touch [;] or [:] of the desired item to change its setting.

Setting items:

MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE / COUNTRY CODE / PARENTAL / DIGITAL OUT MODE / OPTICAL OUT / TV SCREEN

Display example for DVD setup screen

Touch [;] or [:] to set a desired language.

Touch [ ] or [ ] to turn	Touch [CODE] to display the
pages of setting items.	numeric keypad screen.

Numeric keypad input screen

The numeric keypad is used if you want to play back in a language other than that displayed, or to input your parental lock password, etc.

5 Touch [RETURN] to return to the previous screen.

Touch [MAIN CONT.] to return to the main source screen that was displayed before the setup operation was started.

•Immediately after inputting titles or changing the settings of DVD mode (while the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF.

Otherwise, a title may not be written, or the settings may not be changed.

Changing the language setting

The audio language, subtitle language and menu language can be set according to your preferences.

Once set, this becomes the default language. This function is convenient when you always want to listen in English. (The language setting is not effective on some discs. If not, the default language is set from the factory.)

•When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected.

•To temporarily change the language of the current disc, either do so from the DVD menu or by using the operation described in the section “Switching the Audio Tracks” (page 21).

•If the disc does not include the selected language, the disc’s default language is set.

Continued

27-EN