Other Functions
Additional Information
Adjusting the sound characteristics
You can adjust the bass, treble, balance and fader.
1 Select the item you want to adjust by
| pressing (SEL) repeatedly. |
| To adjust bass or treble, press (SEL) |
| repeatedly until “BAS“ or “TRE“ flashes. |
| BAS (bass) nTRE (treble) |
| nBAL (balance) nFAD (fader) |
| nVOL (volume) |
| 2 Adjust the selected item by pressing (+) |
EN | |
| or (Ð). |
| Adjust within three seconds after selecting. |
| (After three seconds the buttons work as |
| volume control buttons.) |
Changing the sound and display settings
Enjoying bass and treble even at low volume — Loudness
Bass and treble will be reinforced.
Press (LOUD) . “LOUD” appears.
To cancel, press (LOUD) again.
Turn off the beeps
Press (6) while pressing (SEL).
To obtain the beeps again, press these buttons again.
Precautions
∙If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.
∙If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.
∙If no sound comes from the speakers of a
∙When the tape is played back for a long period, the cassette shell may become warm because of the
If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.
To maintain high quality sound
If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether.
Cassette cleaning kits cannot remove sugar from the tape heads.
6
Actual total number: | Sony |
|
|