Programmable Settings
Line mode
Generally, the line mode setting should not be adjusted.
When another phone connected to the same line is in use, and
–if kor lis not displayed on the handset, or
–if {LINE1} or {LINE2} button light is off on the base unit,
you need to change the line mode to “A”. LYou only need to program this setting once, using either the handset or base
unit.
Handset
1 {MENU} (center of joystick) ihi {SELECT}
2
3
4
5 Select the desired setting. (Default: “B”)
i{SAVE} i{OFF}
Base unit
1 {MENU} ihi{SET}
2 “Set tel line” i{SET} 3 “Set line mode” i{SET}
4 Select the desired line.
5 Select the desired setting. (Default: “B”) i{SET} i{STOP}
Changing the PIN (personal identification number) o
For security, the PIN must be entered when changing certain settings such as registering units. The default setting is “7262”.
Important:
LIf you change the PIN, please make note of your new PIN. The unit does not reveal the PIN to you.
1
2
3 To change the PIN for the first time, skip to step 4.
To change the PIN, enter the current 4- digit PIN. i{SET}
4
5 Enter the new
If you forget the PIN (resetting the base unit to its default settings)
If you set the PIN and you cannot remember it, you can reset the base unit using the following procedures.
Base unit:
{MENU} i{MUTE} i {#}{9}{0}{0}{0}
Note:
LThe following items are reset to their default settings:
–Settings checked in the base reset column on page 93
–Answering system: On
–Line selection for answering system: Line 1 and line 2
LIf you have registered a cellular phone, the following cellular phone settings are also reset to their default settings.
–“Assign Base/HS” (Allows you to select which unit to ring for cellular calls, page 69): “All”
52For assistance, please visit http://www.panasonic.com/phonehelp