Motorola HT1550XLS ALL Group Scan G LTR Trunked Operation only, All Group Scan, All Group On?

SCAN

•The Gsymbol appears on the LCD screen when non-prioritized Auto Group Scan has been activated.

•The Gsymbol appears on the LCD screen when prioritized Auto Group Scan has been activated.

•There is no LED indicator during Auto Group Scan.

To stop Auto Group Scan:

Select a talkgroup that has not been programmed for Auto Group Scan by your dealer.

ALL GROUP SCAN G

(LTR TRUNKED OPERATION ONLY)

All Group Scan scans all talkgroups within the selected LTR trunked zone.

When All Group Scan is enabled:

•The Gsymbol appears on the LCD screen.

•The LED indicator blinks green during All Group Scan operation; it stops blinking when the radio switches to an active talkgroup.

48

Note: If you enter menu mode while the radio is scanning, scanning stops. It resumes when you exit menu mode.

To start or stop an All Group Scan operation through the menu (see page 11):

•Press the preprogrammed All Group Scan button once to start All Group Scan.

•Press the preprogrammed All Group Scan button again to stop All Group Scan.

–or–

To start or stop All Group Scan operation through the menu:

1)to enter Menu Mode.

2	muntil	All Group Scan
3	)to select	All Group Scan
	You see the current scan status.
4	muntil	All Group On?
	–or–	All Group Off?

5)to confirm your selection.

English