Motorola HT1550XLS manual System Scan G LTR and Conventional Operation, Sys Scan On?

SYSTEM SCAN G

(LTR AND CONVENTIONAL OPERATION)

System Scan scans trunked talkgroups and conventional channels between LTR and conventional zones, as programmed by your dealer. Up to 16 different talkgroups or conventional channels can be programmed into each Scan list. You can edit these lists through your radio’s menu (see page 50).

When System Scan is enabled:

•The Gsymbol appears on the LCD screen.

•The LED indicator blinks green during System Scan operation; it stops blinking when the radio switches to an active talkgroup or channel.

Note: If you enter menu mode while the radio is scanning, scanning stops. It resumes when you exit menu mode.

To start or stop a System Scan operation:

Press the preprogrammed Scan button (see page 11) to start or stop scanning,

–or–

Do the following:

1)to enter menu mode.

2	muntil	System Scan
3	)to select	System Scan
	You see the current scan status.
4	muntil	Sys Scan On?

–or– Sys Scan Off?

5)to confirm your selection.

SCAN

49

English