Motorola HT1550XLS manual Making a Phone Call D Through a Conventional System, To select

PHONE

English

5Press and Release the PTT button.

•If phone access is successful, a dial tone sounds.

•If phone access is unsuccessful, a low- pitched alternating tone sounds. Discon- nect the call (see step 8) and try again.

6Enter the phone number with the keypad. The number is automatically sent without pressing the PTT button again.

–or–

mto select a

number from the XXX-XXX-XXXXphone list.

Press and release the PTT button again to send the number.

7Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press the PTT button to talk; release it to listen.

8To disconnect the phone call: Press and hold (to exit Phone. Dno longer appears on the LCD.

56

MAKING A PHONE CALL D

THROUGH A CONVENTIONAL SYSTEM

To initiate a phone call:

Press the preprogrammed Phone button, and skip to step 5.

–or–

Press the PTT button, and if the Hot keypad feature has been programmed by your dealer, do the following:

1Select a conventional zone and channel that have been programmed for telephone.

2)to enter menu mode.

3	muntil	Phone
4	)to select	Phone

Dappears on the LCD screen when you are in Phone Mode.