Siemens SL45 manual 60Setup, Security, Babysitter, Only last

60Setup

Security_

The phone and SIM card are protected against misuse by several security codes.

PIN 1 Protects your SIM card (per- sonal identification number).

PIN 2 This is needed to set the charge detail display and to access additional functions on special SIM cards.

PUK Key code. Used to unlock SIM cards after the wrong PIN has been entered.

Phone Protects your phone. Must code be entered at the first securi- ty setting (4-8 digits)).

Keep these confidential numbers in a safe place where you can access them again if required.

￿0HQX￿ Î Setup Î

Security Î

then select a function:

Babysitter

(Phonecode)

Calls can only be made to one phone number that is dialled by holding down the left soft key. Enter phone number and name or select from the Addressbook.

To end:

￿Hold down and enter phone code.

Only * _

(PIN 2)

The dialling options are restricted to specific phone numbers. If only area codes are entered, the relevant phone numbers can be added to these manually before dialling.

For further information see p. 22.

Only last 10

(Phonecode)

Calls are limited to the call list

of dialled numbers. This call list can be filled with phone numbers specifically for this purpose: Delete (see also p. 49) the call list and create “new entries“ by dialling phone numbers and cancelling before the connection is established.