68Fax/data mode using a PC
With the phone connected to a PC (see p. 69), you can transmit and receive faxes and data. Appropriate software for data communication/ fax communication must be available on your PC.
Fax and data services must be enabled on your phone. Different networks support different types of fax/data reception; contact your Service Provider for details.
Fax/data
Your Service Provider must give you a phone number for telephony and a fax/data number.
Sending
Start your PC communication program and enter the destination phone number in the program.
Receiving
The call is signalled by a special ringer and its type (fax or data) is displayed.
,
Incoming Data
Answer Reject
Now start the communication program on your PC to receive the fax.
Speech/fax
Send
0HQX Î Setup Î
Fax/data mod. Î
Send Sp/Fax
Set this function on the phone before transmission so that you can switch from voice mode to fax mode.
While the connection is being set up the following soft key is available for two seconds:
6S)D[ Switch to Send Sp/Fax mode.
)D[ Switch to fax mode; you may now send a fax.
Receive
(Only if a special fax number is not available).
Start the communication program on your PC and switch on the function on the phone during the call (the PC accepts the connection).
0HQX Î Settings Î
Fax/data mod. Î
Receiv.Sp/Fax
End transmission
End transmission in the PC software and/or press 4.