Nokia 211S manual Connecting to the TV, Connecting a TV and VCR

Installation of the Mediamaster

Connecting to the TV

•Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.

•Connect the TV aerial to the TV.

Connecting a TV and VCR

Refer to your VCR’s manual for full instructions.

•Connect one SCART cable from the main SCART socket on the TV to the TV SCART socket on the Mediamaster.

• Connect another SCART cable from the VCR to the AUX SCART socket on the Mediamaster.

•Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV.

•Connect the TV aerial to the RF input socket on the VCR.

Connecting an analogue satellite receiver and a VCR

•Connect a SCART cable from the main SCART socket on the TV to the TV SCART socket on the Mediamaster.

•Connect a SCART cable from the VCR to the AUX SCART socket on the Mediamaster.

•Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV.

•Connect an RF cable from the RF output on the analogue re- ceiver to the RF input socket on the VCR.

•Connect the TV aerial to the RF input socket on the analogue receiver.

In order to switch the signal from the dish between the ana- logue and digital receivers, you will need a Nokia smart switch (at A B in the diagram) or a Universal Twin LNB.

Nokia smart switch

•Connect a coaxial cable from output A on the smart switch (ac- cessory) to the LNB socket on the analogue receiver.

•Connect a coaxial cable from output B on the smart switch to the ANTENNA socket on the Mediamaster.

The analogue receiver must be switched OFF (in stand-by mode) when you want to watch digital satellite channels from the Mediamaster.

SCART

VCR

RF

SCART

SCART

Mediamaster

With Nokia smart switch

VCR

RF

SCART

Analogue receiver

Nokia smart switch

GB 15