4.BASIC FUNCTIONS
4.2.4 Dialing from Phonebook
You can dial the dialing number from Phone book (60 locations).
1)Press the Names ( 
) button.
2)Select Find in the Phonebook menu.
3)Search the desired name by the name searching method.
4)Press the OK ( 
) button, then “Enter Name: “ is displayed.
5)Enter the desired name. (Ex : “KE” for KENNY).
6)Press the Find ( 
) button to search it. (If you don’t enter the desired name and press the Find ( 
) button, all phonebook names are displayed, and then you can select the
desired name by pressing the UP/DOWN ( | )buttons. |
7)Press the Call ( 
) button to dial the telephone number, if you find the desired name. Another method is as the below.
8)Press the DOWN( 
)button, then the names in the phonebook list are displayed.
9)Select the desired name and press the 
button to dial that number.
4.3 Placing an Outside Call
4.3.1 Pre Dial
1)
CO Line Access Code (9, 8+XX or 88+XX) → Phone Number → 
→ Connection
2)
CO Line Access Code (9, 8+XX or 88+XXX) → Phone Number → 
→ Connection
You may dial telephone number in an idle state before pressing 
button (up to 24 digits). Since it is displayed only 11 digits per line on the LCD. If you dial a wrong digit, a user can erase last 1 digit by pressing Delete ( 
) button once and if you want to erase all digit dialed, press Delete ( 
) button for longer than 1 second. If you want to insert dialing pause among dial numbers, press “Option” button and select “Insert Pause”. Then “P” is displayed on the LCD.
zDial phone number.
zPress TALK( 
) button.
zPhone( 
) icon is displayed on the LCD.
zThe LCD message is displayed as the left figure and connection tone is heard when connection is completed.
Note
You can insert dialing pause pressing “#” button longer then 1 second in both
27