6.Programming Features
3)Dialing color When you set this function each number is displayed on screen with a different color.
4)If you want to change the contrast, select Contrast Set and press the OK ( 
) button.
And then change the contrast with the LEFT/RIGHT( | ) buttons, and press the OK | |
( | ) button. |
|
5)If you want to change the lighting, select Lighting Set and press the OK (
) button. And then select one of the menu, “Standard”, “Always On”, “Always Off”, “Sleep Mode”, and press the OK ( 
) button. "Sleep Mode" can be selected with "Standard" and will be inactive when you select other mode.
6)If you want to change the dialing color, select Dialing Color and change to Yes or No
with the LEFT/RIGHT (
) buttons, and then press the OK ( 
) button.
7)If you set sleep mode to “yes”, phone will be turn off LCD after 1minute after LCD backlight turning off.
Note
Standard : the lighting turns off after about 20 seconds from the last key pressure.
6.5.5 Language
The four multi languages are provided. One of four, English, Italian, Spanish, Russian can be
selected by pressing LEFT/RIGHT ( ) button, and press OK ( 
) button. This sets only the language on the phone. To change the language of system, you should refer to system programming manual.
6.5.6 Silent Mode
A user can make silent mode of the phone. Silent mode is set by pressing the button more than 1 second when the phone is in idle state and then there is one time vibration. In silent mode, there aren’t beep tones, key tones and rings. But for being conscious of incoming call there is phone vibration.
To cancel the silent mode, pressing the | button more than 1 second when the phone is in | ||
idle state, then confirmation tone is heard and silent mode function is disabled. |
| ||
Silent mode can be enabled or disabled by pressing the LEFT/RIGHT ( | ) button, and | ||
press OK ( | ) button. |
|
|
6.5.7 Keypad Lock
This function is to prevent from pressing any key unconsciously. In keypad lock mode, when a user receives a call, the mode is changed to the
1)This function is set to ENABLE or DISABLE by Keypad Lock setting operation in Phone
Setting Menu. The initial state is Unlock. Once this function is set to ENABLE, any key operation is not available except Unlock soft key. While setting this function, a user can receive a call if there is an incoming call.
2) You can also set Keypad Lock to enable by pressing button in standby mode directly.
When key lock mode is set, “Keypad Locked” is displayed on the LCD and all keys can’t be entered except for
1)To release the locked key, press Unlock ( 
) button and OK( 
) button.
45